2570C and 2670C Wheel Feller Bunchers Caterpillar


Cab Tilting

Usage:

2670C B3E

------ WARNING! ------

Do not tilt the cab when occupied. Before tilting the cab remove all loose articles from the cab, secure all windows and emergency exits, and then close the cab and cab riser doors. Failure to do so can result in personal injury or damage to the machine.


Note: Always verify that machine is on level ground before tilting cab.



Illustration 1g06310832
Cab guard installed.

Remove the right-hand cab guard before tilting the cab.



Illustration 2g06310836
Cab guard removed.


Illustration 3g06108852

Locate the cab tilt jack rod (1) . The rod is located in the left-hand rear engine compartment. The removal screws (2) for the cab pins are also located in the left-hand rear engine compartment.



Illustration 4g06108920

Loosen the cab retaining pin hardware, bolts, and washers (3).



Illustration 5g06109012

Insert the removal screws (4) into the lower left-hand threaded holes to loosen the cab retainers to loosen. Remove the cab retaining pins.

Raise



Illustration 6g06108909

Access the cab tilt pump (5) in the diesel fuel fill compartment.

Place cab tilt jack rod in the cab tilt pump.



Illustration 7g06109033

Note: When the pump is jacked, the cab will move to the RAISE position.



Illustration 8g06109042

After making sure that the cab has moved to the highest position, stop jacking pump.

Lower



Illustration 9g06109047

Turn the lever (6) on the side of the cab tilt pump to lower.

When the pump is jacked, the cab will move to the LOWER position.

Note: Slowly lower cab to over center position.



Illustration 10g06109049

Once cab is lowered, reinstall cab retaining hardware.

Note: Return cab tilt pump jack rod to storage location. Return loosening screws to storage location. Verify that pump lever is returned to raise position.

Caterpillar Information System:

C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
An Improved Wheel Speed Sensor is Now Available on Certain RM500B Rotary Mixers {4351, 5058} An Improved Wheel Speed Sensor is Now Available on Certain RM500B Rotary Mixers {4351, 5058}
Cleaning Procedure for the Polycarbonate Windshields, Windows, and Skylights on Certain Forest Machines, Track Feller Bunchers, Wheel Feller Bunchers, and Wheel Skidders {7310, 7340} Cleaning Procedure for the Polycarbonate Windshields, Windows, and Skylights on Certain Forest Machines, Track Feller Bunchers, Wheel Feller Bunchers, and Wheel Skidders {7310, 7340}
Slow or Inoperable Telescoping Cylinder During Retraction on Certain Telehandlers {5325, 5362} Slow or Inoperable Telescoping Cylinder During Retraction on Certain Telehandlers {5325, 5362}
Certain Cat® Product Link Device Back-Office May Not Allow to Set Hours Locally {7606} Certain Cat® Product Link Device Back-Office May Not Allow to Set Hours Locally {7606}
Ethernet Flashing and Programming Routers on Cat® Command for Dozing System Devices {7610, 7620} Ethernet Flashing and Programming Routers on Cat® Command for Dozing System Devices {7610, 7620}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Fuel Rail Pressure Problem - Gas
Hose Clamps May Have the Incorrect Torque on Certain Telehandlers {1380, 1812, 1813, 5057} Hose Clamps May Have the Incorrect Torque on Certain Telehandlers {1380, 1812, 1813, 5057}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Steering Cylinder (Rear) - Remove and Install
An Improved Pin is Now Used for Certain CX38 Transmission in Certain 700 Series Articulated Trucks {3160} An Improved Pin is Now Used for Certain CX38 Transmission in Certain 700 Series Articulated Trucks {3160}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Fuel System Operation
3516E Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - With Fuel/Water Separator
C175 Tier 4 Final Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000} Shims Added to Coupler to Decrease Side to Side Motion Are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {6129, 7000}
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620} Troubleshooting Procedures for Supercom Data Acquisition Systems are Now Available for Certain Off-Highway Trucks {7600, 7601, 7606, 7620}
New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000} New C175 High Altitude Low Maintenance Ratio Engine for 797 Off-Highway Trucks {1000}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Control Manifold
A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498} A New Thermowell Is Available for Certain C175 Off-Highway Truck/Tractor Engines {7498}
Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207} Oil Fill Capacity for the Circle Drive Housing has been Updated on Certain 14M Series 3 Motor Graders {0374, 5207}
Product Link ® Elite PLE742 Systems Service Tools
563D and 573D Wheel Feller Buncher Windows - Clean
3516E Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.