1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i07281844

794 AC Off-Highway Truck Caterpillar


Leaving the Machine

Usage:

794 AC HRT

  • Use the steps and the handholds when you get off the machine. Make sure that the steps are clear of debris before you dismount.
    Show/hide table
    Illustration 1g00037860

  • Face the machine and maintain a three-point contact with the steps and with the handholds.

    Note: Three-point contact can be two feet and one hand. Three-point contact can also be one foot and two hands.

  • Inspect the engine compartment for debris. Clean out any debris to avoid a fire.
    Show/hide table
    Illustration 2g03663024

  • Turn the battery disconnect switch (1) to the OFF position. Secure the lock on the switch. Disconnecting the battery will help protect against a battery short circuit and any possible current draw by components over extended time periods.

  • Install all the covers and install all the vandalism protection locks.

  • If the machine will remain parked, chock the wheels when appropriate. Refer to Operation and Maintenance Manual, "Use of Wheel Chocks" for information on the appropriate use of wheel chocks.

    • Caterpillar Information System:

    C11 and C13 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Oil Pans
    Installing the New NOx Reduction System Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400} Installing the New NOx Reduction System Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400}
    New NOx Reduction System (NRS) Differential Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400} New NOx Reduction System (NRS) Differential Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400}
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel System Water Separator - Drain
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel System Primary Filter (Water Separator) Element - Replace
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Final Drive Oil Sample - Obtain
    New Service Information Content Is Now Available in Channel 1 {0374, 7000} New Service Information Content Is Now Available in Channel 1 {0374, 7000}
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Final Drive Oil - Change
    3500 Industrial and Generator Set Engines Overhaul (Major)
    3500E Marine Engines Overhaul (Major)
    3500 and 3500B Engines Overhaul (Major)
    336 Excavator Machine Systems Fuel Tank - Remove and Install
    C27 and C32 Generator Set Maintenance Interval Schedule - Standby
    C27 and C32 Generator Set Maintenance Interval Schedule - Prime
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Water and Sediment - Drain
    C27 and C32 Generator Set Product Description
    C27 and C32 Generator Set Configuration Parameters
    C27 and C32 Generator Set Cold Weather Starting
    C27 and C32 Generator Set Starting the Engine
    C27 and C32 Generator Set Control Panel - Inspect/Test
    C27 and C32 Generator Set Model View Illustrations
    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuses - Replace
    336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Oil Pan - Remove and Install
    C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Remove
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.