New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160} Caterpillar


New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160}

Usage:

745C OEM JE8
Articulated Truck
735C (S/N: LFJ1-254; TFJ1-333)
740C EJECTOR (S/N: LFN1-278; TFN1-202)
745C (S/N: JE81-90122; JE91-102; LFK1-1113; TFK1-1693)

New assembly hardware is now available for the CX38 clutch housing on the machines listed above. The new hardware will improve bolt retention in the clutch housing assembly.

Table 1
Parts Required 
Item  Qty  Parts 
48  538-7564 Screw 


    Illustration 1g06159869
    (1) 538-7564 Screw

  1. In the event of a failure repair or during rebuilds, replace damaged screws with new self locking screws (1). Torque each screw to a tightness of 13 ± 3 N·m (115 ± 27 lb in). Refer to Disassembly and Assembly, UENR4227, " Transmission Planetary - Assemble" for the appropriate torque sequence and assembly instructions.

Caterpillar Information System:

Regulatory Compliance Information Wireless Device - Tire Pressure Antenna (Gateway Series) - If Equipped
The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
Regulatory Compliance Information Wireless Device - APS2 Tire Sensor- If Equipped
Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220} Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220}
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000} Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000}
New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643} New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643}
New Power Train (Transmission) Software is Now Available for Certain 824K Large Wheel Dozers, 825K Soil Compactors, and 826K Landfill Compactors {4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620} New Power Train (Transmission) Software is Now Available for Certain 824K Large Wheel Dozers, 825K Soil Compactors, and 826K Landfill Compactors {4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}
994K Wheel Loader Systems Linkage Pin and Seal Group (Bucket Control)
994K Wheel Loader Systems Gear Pump (Secondary Steering)
994K Wheel Loader Systems Gear Pump (Secondary Steering)
994K Wheel Loader Systems Electronic Control Module
Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258} Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258}
994K Wheel Loader Systems Parking Brake
New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620} New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620}
Electric Horn May Malfunction on Certain Telehandlers {4300, 4312} Electric Horn May Malfunction on Certain Telehandlers {4300, 4312}
994K Wheel Loader Systems Piston Pump (Implement)
994K Wheel Loader Systems Piston Pump (Implement)
994K Wheel Loader Systems Pump Drive
994K Wheel Loader Systems Relief Valve - Tilt Cylinder Rod End
994K Wheel Loader Systems Relief Valve
994K Wheel Loader Systems Relief Valve
994K Wheel Loader Systems Selector and Pressure Control Valve (Transmission)
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Cylinder - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.