GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Caterpillar


Rotator Motor and Manifold - Remove and Install

Usage:

GSH455 GY4

Removal Procedure

Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned to prevent dirt from entering the internal mechanism.


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g06248493

  1. Use two people to remove rotator motor and manifold (1). The weight of rotator motor and manifold (1) is approximately 24 kg (53 lb).

  2. Remove four bolts (2) and rotator motor and manifold (1).

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite 243 

  1. Install rotator motor and manifold (1) in the reverse order of the removal.

    1. Apply Tooling (A) to the threads of four bolts (2).

Caterpillar Information System:

Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000} Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000}
New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643} New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643}
New Power Train (Transmission) Software is Now Available for Certain 824K Large Wheel Dozers, 825K Soil Compactors, and 826K Landfill Compactors {4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620} New Power Train (Transmission) Software is Now Available for Certain 824K Large Wheel Dozers, 825K Soil Compactors, and 826K Landfill Compactors {4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}
994K Wheel Loader Systems Linkage Pin and Seal Group (Bucket Control)
994K Wheel Loader Systems Gear Pump (Secondary Steering)
994K Wheel Loader Systems Gear Pump (Secondary Steering)
994K Wheel Loader Systems Electronic Control Module
994K Wheel Loader Systems Circuit Breakers - AUTOMATIC RESET
994K Wheel Loader Systems Control Manifold
994K Wheel Loader Systems Control Valve - Mounting
994K Wheel Loader Systems Control Valve - Mounting
Engine Parameters May Show "Data Not Available" Message in Real-Time Web Parameter On Certain Cat® Product Link Elite Devices {0115} Engine Parameters May Show "Data Not Available" Message in Real-Time Web Parameter On Certain Cat® Product Link Elite Devices {0115}
Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220} Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220}
Regulatory Compliance Information Wireless Device - APS2 Tire Sensor- If Equipped
The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
Regulatory Compliance Information Wireless Device - Tire Pressure Antenna (Gateway Series) - If Equipped
New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160} New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160}
Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258} Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258}
994K Wheel Loader Systems Parking Brake
New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620} New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620}
Electric Horn May Malfunction on Certain Telehandlers {4300, 4312} Electric Horn May Malfunction on Certain Telehandlers {4300, 4312}
994K Wheel Loader Systems Piston Pump (Implement)
994K Wheel Loader Systems Piston Pump (Implement)
994K Wheel Loader Systems Pump Drive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.