Axle Housing and Flange - Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 230-7923 | Spanner Wrench As | 1 |
C | 2P-8312 | Retaining Ring Pliers | 1 |
D | 129-1938 | Grease Cartridge | - |
Show/hide table
Illustration 1 | g06187892 |
Show/hide table
Illustration 2 | g06187894 |
Show/hide table
Illustration 3 | g06187480 |
Show/hide table
Illustration 4 | g06187488 |
Show/hide table
Illustration 5 | g06187512 |
If the tab on the locking plate does not line up with the slot in spanner nut, tighten the spanner nut until the slot and the tab are aligned. |
Show/hide table
Illustration 6 | g06187517 |
Show/hide table
Illustration 7 | g06187523 |
Show/hide table
Illustration 8 | g06187575 |
Insert a suitable pry bar and move the knuckle up and down while you tighten the bolts. Tighten the bolts until there is no end play. Use a suitable feeler gauge and measure the clearance between the pin assembly and the knuckle. Measure the clearance at several points and average the measurement. Use shims that equal the difference. |
Show/hide table
Illustration 9 | g06187618 |
Show/hide table
Illustration 10 | g06187636 |
Install the correct number of shims. |
Show/hide table
Illustration 11 | g06187887 |
End By:
- Install steering axle and drive.
Caterpillar Information System:
A New Boom Chain Lubricant Is Now Used On Certain Telehandlers {0645} A New Boom Chain Lubricant Is Now Used On Certain Telehandlers {0645}
The Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789, and 793 Off-Highway Trucks is Updated {0756, 0787, 7200, 7201} The Procedure to Perform Ultrasonic Inspection (UT) on the Front Suspension Group of 785, 789, and 793 Off-Highway Trucks is Updated {0756, 0787, 7200, 7201}
785G OFF-HIGHWAY TRUCK Engine Supplement Hood (Front) - Remove and Install
A Steering Sensor Guard is Now Used on Certain 797F Off-Highway Trucks {1408, 1439, 430S, 7150} A Steering Sensor Guard is Now Used on Certain 797F Off-Highway Trucks {1408, 1439, 430S, 7150}
Improved Body Rocker Group is Now Used on Certain 797 Off-Highway Trucks {7258} Improved Body Rocker Group is Now Used on Certain 797 Off-Highway Trucks {7258}
A New Final Drive Plate and Cover are Now Used on Certain 794 AC and 795F AC Off-Highway Trucks {4008, 4050} A New Final Drive Plate and Cover are Now Used on Certain 794 AC and 795F AC Off-Highway Trucks {4008, 4050}
Recommended Inspection and Maintenance Improves Service Life of Universal Joints on Certain 793F Off-Highway Trucks {0374, 3251, 3253} Recommended Inspection and Maintenance Improves Service Life of Universal Joints on Certain 793F Off-Highway Trucks {0374, 3251, 3253}
Assembly instructions have been updated for the 793D Off-Highway Truck {0374, 3256, 3257, 3258, 3281} Assembly instructions have been updated for the 793D Off-Highway Truck {0374, 3256, 3257, 3258, 3281}
An Improved Carrier and Hub for 794 AC, and 795F AC Off-Highway Trucks are Available {4050, 4084} An Improved Carrier and Hub for 794 AC, and 795F AC Off-Highway Trucks are Available {4050, 4084}
AP555F Asphalt Paver Propel System Accumulator (Track Tension) - Test and Charge
Plate and Friction Disc Failures May Occur Within Clutch Six of the Transmission Planetary on Certain C-Series Articulated Trucks {3054, 3160} Plate and Friction Disc Failures May Occur Within Clutch Six of the Transmission Planetary on Certain C-Series Articulated Trucks {3054, 3160}
Procedure to Improve Sealing on the Track Adjusting System for Certain D6K Track-Type Tractors and PL61 Pipelayers {4158} Procedure to Improve Sealing on the Track Adjusting System for Certain D6K Track-Type Tractors and PL61 Pipelayers {4158}
Improved Tilt Cylinder Heads and Tilt Cylinder Head Seals Are Now Used on Certain TL1055D and TL1255D Telehandlers {5104} Improved Tilt Cylinder Heads and Tilt Cylinder Head Seals Are Now Used on Certain TL1055D and TL1255D Telehandlers {5104}
785G Off-Highway Truck Systems Magnetic Screen (Torque Converter)
An Improved Assembly Procedure for the Control Group Lever Is Now Used on Certain 424B Backhoe Loaders {5063} An Improved Assembly Procedure for the Control Group Lever Is Now Used on Certain 424B Backhoe Loaders {5063}
785G Off-Highway Truck Systems Electronic Control (Steering System)
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Engine Air Filter Element - Clean/Replace
730 EJ Articulated Truck Ejector Control
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Engine Air Precleaner - Inspect/Clean
785G Off-Highway Truck Systems Torque Converter
CB1.7 Utility Compactor Machine Systems Machine Preparation for Troubleshooting
CB1.7 Utility Compactor Machine Systems Visual Inspection
3516E Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
CB1.7 Utility Compactor Propel Systems Reverse Switch - Test