Gear Pump (Steering Oil Cooler) - Disassemble
Start By:
- Remove the gear pump for the steering oil cooler.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Show/hide table
Illustration 1 | g06166601 |
Show/hide table
Illustration 2 | g06166629 |
Show/hide table
Illustration 3 | g06166642 |
Inspect two terminal bushings for wear or damage. |
Note: If terminal bushings need to be replaced, score the terminal bushings with a small saw. Be careful not to cut into the bore of the flange assembly. Remove the terminal bushings from flange assembly. Be careful not to damage or change the dimension of the bore.
Show/hide table
Illustration 4 | g06166648 |
Show/hide table
Illustration 5 | g06166656 |
Prior to removal, identify the orientation of pressure plate for installation purposes. |
Show/hide table
Illustration 6 | g06166665 |
Show/hide table
Illustration 7 | g06166673 |
Prior to removal, identify the orientation of pressure plate for installation purposes. |
Show/hide table
Illustration 8 | g06166683 |
Show/hide table
Illustration 9 | g06166686 |
Inspect two terminal bushings for wear or damage. |
Note: If terminal bushings need to be replaced, score the terminal bushings with a small saw. Be careful not to cut into the bore of the body assembly. Remove the terminal bushings from body assembly. Be careful not to damage or change the dimension of the bore.
Caterpillar Information System:
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Split Drum
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Solid Drum
AP355F Asphalt Paver Machine Systems Generator - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Solid Drum
785G Off-Highway Truck Machines Systems Window Wiper Motor - Remove and Install
C175-16 Engine for Off-Highway Trucks Engine Oil Pump
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Dosing Control System Operation
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Air Inlet and Exhaust System Operation - Aftertreatment
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Split Drum
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347} Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054} Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054}
High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551} High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551}
785G Off-Highway Truck DEF Manifold Filters - Replace
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920} New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920}
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Travel Speed - Check
A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493} A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493}
CB7 and CB8 Asphalt Compactor Propel System Parking Brake - Test
CB7 and CB8 Asphalt Compactor Propel System Machine Preparation for Troubleshooting
2570D and 2670D Wheel Feller Buncher Power Train Axle Housing - Disassemble
CB7 and CB8 Asphalt Compactor Propel System Visual Inspection
An Improved Engine Oil Filter Element Is Now Available on Certain Cat Products {1308} An Improved Engine Oil Filter Element Is Now Available on Certain Cat Products {1308}