Generator - Remove and Install
- Turn the battery disconnect switch to the off position
Show/hide table
Illustration 1 g06166782 - Remove bolts (3) and guard (2). Remove bolts (1) and cover (4).
Show/hide table
Illustration 2 g06166806 - Remove belts (5). Refer to Operation and Maintenance Manual, "Belt - Inspect/Replace"for the removal and installation procedures.
Show/hide table
Illustration 3 g06166829 - Disconnect harness assemblies (6). Remove nut (7) and cable assembly (8).
Show/hide table
Illustration 4 g06166842 Show/hide table
Illustration 5 g06166844 Show/hide table
Illustration 6 g06166881 - Attach a suitable lifting device to generator (9). the weight of generator (9) is approximately
127 kg (280 lb) . - Disconnect ground strap (10). Loosen jam bolts (11) on both sides.
- Remove bolts (12) . Remove generator (9).
- Install generator (9) in the reverse order of removal.
Caterpillar Information System:
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Solid Drum
785G Off-Highway Truck Machines Systems Window Wiper Motor - Remove and Install
C175-16 Engine for Off-Highway Trucks Engine Oil Pump
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Dosing Control System Operation
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Air Inlet and Exhaust System Operation - Aftertreatment
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Split Drum
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347} Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054} Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054}
High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551} High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551}
2570D and 2670D Wheel Feller Buncher Power Train Piston Pump (Propel) - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral (Mechanical) - Test and Adjust - Solid Drum
Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173} Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173}
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Split Drum
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
785G Off-Highway Truck DEF Manifold Filters - Replace
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920} New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920}
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Travel Speed - Check
A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493} A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493}
CB7 and CB8 Asphalt Compactor Propel System Parking Brake - Test
CB7 and CB8 Asphalt Compactor Propel System Machine Preparation for Troubleshooting