Engine Oil Pump
Show/hide table
Illustration 1 | g06153998 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand to ensure that the pump rotates freely. | |||
B | 1 | 417-7838 Oil Pump Gear | Length of the new gear is Depth of the bore in the oil pump body for new gear is |
C | 1 | 416-9861 Oil Pump Shaft Assembly | Diameter is Distance (A) from the end of the shaft to the gear face is |
D | 1 | 416-9860 Oil Pump Shaft Assembly | Diameter is Distance (F) from the end of the shaft to the gear face is |
E | 1 | 416-9862 Oil Pump Gear | Length of the new gear is Depth of the bore in the oil pump body for new gear is |
Show/hide table
Illustration 2 | g06154000 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
G | - | - | Position for the bushing joints from the centerline through the bushing bores of the 508-3311 Pump Cover is 30±15 degrees. |
1 | 1 | 507-1694 Sleeve Bearing | After installation, bore diameter is Installation depth is |
2 | 1 | 507-1691 Sleeve Bearing | After installation, bore diameter is Installation depth is |
H | 2 | 7N-5683 Dowel | Extension of dowels from the oil pump cover is |
Show/hide table
Illustration 3 | g06154003 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
J | - | - | Position for the bushing joints from the centerline through the bushing bores of the 416-9859 Pump Body is 30 ± 15 degrees. |
3 | 1 | 507-1691 Sleeve Bearing | After installation, bore diameter is Installation depth is |
4 | 1 | 507-1694 Sleeve Bearing | After installation, bore diameter is Installation depth is |
Caterpillar Information System:
C9.3B Engines for Caterpillar Built Machines Unit Injector - Remove
G3516 TA Engine Exhaust Temperature Is High
A New Relay Assembly is Now Used on Certain G3500 Engines {1307, 1319, 4493} A New Relay Assembly is Now Used on Certain G3500 Engines {1307, 1319, 4493}
3512B and 3512C Petroleum Generator Set Engines Exhaust Temperature Is Low
C175 Oil&Gas Offshore Engine Exhaust Temperature Is Low
Masterpact® 3000 Amp and 4000 amp Circuit Breakers Installed on 3500 and C175 Generator Sets May Fail Due to Moisture Entry {1420, 4461} Masterpact® 3000 Amp and 4000 amp Circuit Breakers Installed on 3500 and C175 Generator Sets May Fail Due to Moisture Entry {1420, 4461}
C175 Tier 4 Final Engines for Off-Highway Trucks Measuring Inlet Manifold Pressure
C175 Tier 4 Final Engines for Off-Highway Trucks Crankshaft Position for Valve Lash Setting
C175 Tier 4 Final Engines for Off-Highway Trucks Camshaft Timing
C175 Tier 4 Final Engines for Off-Highway Trucks Fuel Rail Pressure - Release
C175 Tier 4 Final Engines for Off-Highway Trucks Fuel System Inspection
C175 Tier 4 Final Engines for Off-Highway Trucks Cooling System Operation - C175-16 Off-Highway Truck Engines
C9.3B Aftertreatment Systems NOx Sensor Supply - Test
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Model View Illustrations
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Product Description
G3516 TA Engine Exhaust Temperature Is Low
C9.3B Engines for Caterpillar Built Machines Unit Injector - Install
XQP60 and XQP100 Rental Generator Sets Product Description
XQP60 and XQP100 Rental Generator Sets Fluid Recommendations - Fuel Specification
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Product Lifting
C9.3B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Product Storage
C8.7 and C12.9 Marine Engines Inlet Air Is Restricted
C8.7 and C12.9 Marine Engines Alternator Problem - Charging Problem and/or Noisy Operation