426F2 Backhoe Loader Engine Supplement Caterpillar


Battery - Remove and Install

Usage:

426 F2 DJ4

Removal Procedure

------ WARNING! ------

Personal injury may occur from failure to properly service the batteries.

Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.

Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.

Always wear protective glasses when working with batteries.




Illustration 1g06162881


Illustration 2g06162922


Illustration 3g06162960


Illustration 4g06162975

Installation Procedure

  1. Install the battery in the reverse order of removal.

    Table 1
    Tightening Torques 
    Part  Step  Sub Step  Torque 
    Battery Terminal  7.5 ± 5 N·m (66 ± 44 lb in) 
    Bolt(1)  7.5 ± 2 N·m (662 ± 18 lb in) 
    Nut(2)  18.5 ± 1 N·m (164 ± 9 lb in) 
    (1) Torque bolt first.
    (2) Torque nut after bolt is torqued.

Caterpillar Information System:

AP300F Asphalt Paver Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
CP44B and CS44B Vibratory Soil Compactor Machine Systems Fuel Tank - Remove and Install
422F2, 427F2, 428F2, 432F2 and 434F2 Backhoe Loaders Transmission (Standard Shift) Steering Lines
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral (Vibratory) - Test and Adjust - Solid Drum
New Monitor Software for Health Interface Module Is Now Available on Certain Cat® Products {7490, 7605, 7610, 7620} New Monitor Software for Health Interface Module Is Now Available on Certain Cat® Products {7490, 7605, 7610, 7620}
The Procedure to Improve the HAA ATAAC System on the 797F Off-Highway Truck is Updated {1063, 1071} The Procedure to Improve the HAA ATAAC System on the 797F Off-Highway Truck is Updated {1063, 1071}
AP355F Asphalt Paver Machine Systems Hydraulic Cylinder (Hopper Hoist) - Remove and Install
AP355F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Assemble
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408} 2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
426F2 Backhoe Loader Engine Supplement Muffler - Remove and Install
AP355F Asphalt Paver Machine Systems Feeder Drive Shaft Group - Disassemble
793C and 793C XQ Off-Highway Truck Power Train Solenoid Valve (Upshift, Downshift and Lockup Clutch)
C175 Tier 4 Final Engines for Off-Highway Trucks NOx Conversion Is Low
563D and 573D Wheel Feller Buncher Machine Systems Blower Motor - Remove and Install
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) MID 161 - CID 3643 - FMI 9
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) MID 161 - CID 3644 - FMI 9
CS44B and CP44B Vibratory Soil Compactors Cooling System Coolant Sample (Level 1) - Obtain
CS44B and CP44B Vibratory Soil Compactors Cooling System Coolant Sample (Level 2) - Obtain
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral (Vibratory) - Test and Adjust - Split Drum
Recommended Upper Mounting Bracket Inspection on the Output Transfer Gear for Certain 700 C-Series Articulated Trucks {3159} Recommended Upper Mounting Bracket Inspection on the Output Transfer Gear for Certain 700 C-Series Articulated Trucks {3159}
994K Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Remove and Install
CB7 and CB8 Vibratory Asphalt Compactor Machine Systems Case Drain Flow for Piston Motor - Test and Adjust - Split Drum
2570D and 2670D Wheel Feller Buncher Machine Systems Air Conditioner - Remove and Install
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Axle (Front)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.