Improved Coolant Tube Flanges for the Brake Oil Bonnets are Now Used on Certain 793D Off-Highway Trucks {1380}
- Off-Highway Truck/Tractor
- 793D (S/N: FDB1-1855,76001-76005)
Description Of Change: Improved coolant tube flanges for the brake oil bonnets are now used on the machines listed above. The improved coolant tube flange secures the entire circumference of the joint between the tube and the bonnet and provides better service life to the brake oil bonnets.
Adaptable To:
Show/hide table
Illustration 1 | g06211739 |
(1) |
Improved coolant tube flanges (1) are adaptable to the machines within the listed serial numbers, and are effective in production with all machines after the listed serial numbers.
Refer to Table 1 for the parts required to improve the brake oil bonnets and to update hydraulic oil cooler lines group.
Show/hide table
Parts List | |
Qty | Part Number |
2 | 371-6763 Flange |
2 | 342-7962 Ring |
2 | 9M-2092 O-Ring Seal |
4 | 6V-5843 Bolt |
1 | 6V-4356 Clip |
1 | 6V-4357 Clip |
1 | 524-8592 Tube As |
1 | 6V-1196 O-Ring Seal |
1 | 525-2043 Hose As |
2 | 6V-4590 O-Ring Seal |
The special instruction can be found on Caterpillar Service Information System (SIS) and through the normal literature system.
Caterpillar Information System:
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Oil
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
CB7, CB8 and CB10 Vibratory Asphalt Compactors Power Train Drum Mounting
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
994K Wheel Loader Machine Systems Seat - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802} A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304} Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304}
Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065} Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065}
C7.1 Engines and Generator Sets Fuel Consumption Is Excessive
MH3037 Material Handler Machine Systems Main Control Valve - Remove and Install - Lower Valve
C7.1 Engines and Generator Sets Fuel Contains Water
2570D and 2670D Wheel Feller Buncher Engine Supplement Piston Motor (Fan) - Remove and Install
C7.1 Engines and Generator Sets Fuel Rail Pressure Problem
C7.1 Engines and Generator Sets Fuel Temperature Is High
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Disassemble
C7.1 Engines and Generator Sets Inlet Air Is Restricted
980L Tier 3 Wheel Loader Engine Supplement Expansion Tank - Remove and Install
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is High
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is Low
C7.1 Engines and Generator Sets Intake Manifold Air Temperature Is High