Rim - Inspect
Do not reuse rim components that are cracked, worn, damaged, or pitted from corrosion. For more information on the reusability of the rim components, consult your Cat dealer.
a. Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Secure the Machine for Maintenance
- Lockout Controls for the Machine
Note: Consult your tire dealer for dismounting the tires from the rims.
For more information on magnetic particle inspection, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8148, "General Salvage and Reconditioning Techniques" or consult your Cat dealer.
- Perform a magnetic particle inspection of the areas of contact between the flanges and the rim base.
Show/hide table
| |
| Illustration 1 | g06111876 |
- Perform a magnetic particle inspection of the area of contact between the lock ring and the groove for the lock ring.
Show/hide table
| |
| Illustration 2 | g06111880 |
- Perform a magnetic particle inspection of the welds on the rim disc:
- Perform a magnetic particle inspection of the welds on the circumference of the rim base.
- Perform a magnetic particle inspection of the butt welds.
Show/hide table
| |
| Illustration 3 | g06111885 |
Caterpillar Information System:
Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620} Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Differential and Final Drive Oil Filter - Replace
986K Wheel Loader Axle Oscillation Bearings - Lubricate
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
D8T Track-Type Tractor Undercarriage - Clean
A New Clutch Piston Is Now Used on Certain 735C, 740C Ejector, and 745C Articulated Trucks {3030, 3160, 3170} A New Clutch Piston Is Now Used on Certain 735C, 740C Ejector, and 745C Articulated Trucks {3030, 3160, 3170}
Manufacturing Process for Stick Bushings Has Been Improved On Certain Backhoe Loaders {6502, 6533, 7551} Manufacturing Process for Stick Bushings Has Been Improved On Certain Backhoe Loaders {6502, 6533, 7551}
Procedure for Troubleshooting and Correcting Grounding Hardware Issues for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 5062} Procedure for Troubleshooting and Correcting Grounding Hardware Issues for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 5062}
Engine Oil Pan Drain Valve Seizes on Certain 216B3 and 226B3 Skid Steer Loaders {1302} Engine Oil Pan Drain Valve Seizes on Certain 216B3 and 226B3 Skid Steer Loaders {1302}
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
Improved VisionLink Software Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620} Improved VisionLink Software Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Traction Control System (TCS) - Test
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Seat Belt - Inspect
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
986K Wheel Loader Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
320D2 FM Forestry Machine Machine Systems Boom Bearings and Seals - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
3516E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620} Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Leaving the Machine
3516E Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove and Install
New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223} New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223}
988K XE Wheel Loader Machine Systems Ride Control Accumulator - Disassemble