Fuel Line Serviceability for Certain Tier 4 C175 Engines {1100, 1101, 1252} Caterpillar


Fuel Line Serviceability for Certain Tier 4 C175 Engines {1100, 1101, 1252}

Usage:

C175-16 3B9
Engine
C175-16 (S/N: 3B91-101)
C175-20 (S/N: R4F1-114)

Description Of Change: The heads on the Tier 4 C175 engines were manufactured with a spot face where the low-pressure fuel line enters the head.



Illustration 1g06109003

This spot face does not allow for a backup wrench to be placed on the adapter while removing the fuel line. A 19mm crows foot is required to hold the adapter while removing the fuel line.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.



Illustration 2g06109019

A larger spot face was machined to allow for a wrench to be installed on the adapter.

Caterpillar Information System:

C2.4 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Temperature Is High
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Steering) - Remove and Install
Relay Compatibility Issue on Continuous Oil Prelube on 3508 Fire Pump Engines {1319} Relay Compatibility Issue on Continuous Oil Prelube on 3508 Fire Pump Engines {1319}
A New Turbine Inlet Bellows is Available for 3512 Locomotive Engines {1059} A New Turbine Inlet Bellows is Available for 3512 Locomotive Engines {1059}
C175-16 Oil and Gas Generator Set Model View Illustrations
G3512 Generator Set Engines Prelubrication Pump Problem
C4.4 and C6.6 Engines Valve Position - Test
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Switch Circuits - Test - Air Filter Restriction Switch
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
C175-16 Oil and Gas Generator Set After Stopping Engine
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Supply - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Has Excessive White Smoke
C175 Tier 4 Final Engines for Off-Highway Trucks Solenoid Valve - Test - Aftertreatment
C175 Tier 4 Final Engines for Off-Highway Trucks Solenoid Valve - Test - Engine
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Diagnostic Trouble Codes
C175 Tier 4 Final Engines for Off-Highway Trucks Event Codes
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing) - Remove and Install
C7.1 Marine Engine Water Temperature Regulator - Remove and Install
C175-16 Oil and Gas Generator Set Refill Capacities
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Lift) - Remove and Install
C175-16 Oil and Gas Generator Set Maintenance Recommendations
C175-16 Oil and Gas Generator Set Marine Classification Society Certification Requirements
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.