C7.1 Marine Engine Caterpillar


Electronic Control Module - Remove and Install

Usage:

C7.1 JEZ

Removal Procedure



    Illustration 1g06104892

  1. Loosen plugs (3), remove bolts (5), and disconnect harness assemblies (4).

  2. Remove bolts (1) and electronic control module (2).

Installation Procedure

  1. Install electronic control module (2) in the reverse order of removal.

    1. Tighten plugs (3) to a torque of 6 ± 1 N·m (53 ± 9 lb in).

Caterpillar Information System:

New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335} New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New Oil Filter Used In 3600, G3600, and C280 Engines {1308} New Oil Filter Used In 3600, G3600, and C280 Engines {1308}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000} A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Toe) - Remove and Install
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C4.4 and C6.6 Engines Solenoid Valve - Test
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}
A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Passive) - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (PWM) - Test
C4.4 and C6.6 Engines Soot Sensor - Test
C4.4 and C6.6 Engines Speed Control (Analog) - Test
C4.4 and C6.6 Engines Speed Control (PWM) - Test
C4.4 and C6.6 Engines Speed/Timing - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Supply - Test
C175-16 Oil and Gas Generator Set After Stopping Engine
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Switch Circuits - Test - Air Filter Restriction Switch
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Valve Position - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.