New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335} Caterpillar


New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}

Usage:

AP-1000 1HD
Articulated Truck
725C (S/N: TFB1-836)
725C2 (S/N: 2T31-208)
730C (S/N: TFF1-1413)
730C EJECTOR (S/N: TFH1-160)
730C2 (S/N: 2T41-302)
730C2 EJ (S/N: 2T51-1)
735C (S/N: TFJ1-250)
740C EJECTOR (S/N: TFN1-186)
745C (S/N: TFK1-1421)
Asphalt Paver
AP1000F (S/N: AC41-263)
AP1055F (S/N: TJ51-493)
Backhoe Loader
430E (S/N: EAT1-UP)
Cold Planer
PM620 (S/N: JB91-111)
PM622 (S/N: JFC1-112)
Engine
3116 (S/N: 2WG1-UP)
Excavator
323F (S/N: PLB1-223; XCF1-1410; YEJ1-657; KBY1-219)
325F (S/N: YCA1-309)
326F (S/N: HCJ1-171; XFK1-246; WGL1-969)
329F (S/N: ERL1-865)
330F (S/N: WBA1-294; LBN1-341; MBX1-495)
335F (S/N: KNE1-660)
336F (S/N: B391-113; TZA1-540; RKB1-2104; RBC1-301; YBH1-155; ZBJ1-146; SSN1-522; LTP1-285; NBS1-431; KFT1-308; MTW1-178; DFY1-264; WTZ1-250)
340F (S/N: YBF1-268; EAR1-294; WBX1-1)
349F (S/N: BZ21-867; KEA1-182; HPD1-793; SFG1-115; RAX1-106)
352F (S/N: SD21-219; YEG1-253; A9J1-284; XAL1-125; KBP1-422)
374F (S/N: DNM1-483)
390F (S/N: MGF1-349)
Forest Machine
538 (S/N: HBS1-145; JEY1-145)
Landfill Compactor
826K (S/N: 2321-6252)
836K (S/N: TWZ1-589)
Material Handler
MH3022 (S/N: FM21-493; FB31-1)
MH3024 (S/N: FM41-190)
MH3295 (S/N: PA91-303)
Mobile Hydraulic Power Unit
330FMHPU (S/N: B321-106; B331-104)
336FMHPU (S/N: B341-122; B351-107)
374F MHPU (S/N: DP41-105)
390F MHPU (S/N: B371-98198; PT71-102)
Motor Grader
120M (S/N: B9N1-UP)
12M Series 3 (S/N: N9B1-348; N9F1-582; N9P1-197; N9R1-253)
140M (S/N: B9M1-UP)
140M Series 3 (S/N: N9D1-662; N9G1-206; N9J1-447; N9M1-413)
14M (S/N: B9J1-UP)
14M Series 3 (S/N: N9S1-108)
160M (S/N: B9L1-UP)
160M Series 3 (S/N: N9E1-110; N9K1-127; N9L1-145; N9T1-191)
16M Series 3 (S/N: N9Y1-230)
18M Series 3 (S/N: N9A1-227)
24M (S/N: B9K1-UP)
OEM Excavator Based Specialty Solution
330F OEM (S/N: LNX1-110)
Off-Highway Truck/Tractor
770G (S/N: RMA1-101; KDH1-347)
772G (S/N: KEX1-238)
Pipelayer
PL72 (S/N: P721-124)
PL83 (S/N: CB21-175)
PL87 (S/N: TEC1-153)
Reclaimer Mixer
RM500B (S/N: MB91-145)
Soil Compactor
825K (S/N: 2331-5017)
Track-Type Loader
953K (S/N: LJT1-104)
963K (S/N: LBL1-342)
Track-Type Tractor
D6N (S/N: MG51-820; GB61-414)
D6T (S/N: CR31-119; 2B31-1; CG81-105; SGA1-103; RAD1-1001; STE1-118; MEL1-205; WRN1-569; K1R1-1; KMR1-601; WES1-398; SGT1-419; TMY1-361; HTZ1-661)
D7E (S/N: HKA1-470; SSH1-376)
D8T (S/N: FMC1-708)
D9T (S/N: REX1-467)
Vibratory Soil Compactor
CS64B (S/N: CW61-107)
Wheel Dozer
824K (S/N: 2341-4008)
834K (S/N: TWY1-707)
Wheel Feller Buncher
563D (S/N: D631-103)
573D (S/N: D731-202)
Wheel Loader
926M (S/N: LTE1-3500)
930M (S/N: KTG1-3000)
938M (S/N: J3R1-3651)
950 GC (S/N: M5T1-211)
950M (S/N: EMB1-2536; FTR1-1098; J1S1-1)
962M (S/N: EJB1-543; F2T1-565)
966M (S/N: DYC1-1257; LMM1-1; KJP1-1807)
966M Series XE (S/N: P6C1-1068)
972M (S/N: A8P1-1035; JPR1-910)
972M Series XE (S/N: EDW1-849)
980M (S/N: KRS1-1831; N8T1-826)
982M (S/N: F9A1-404; K1Y1-1032)
988K (S/N: TWX1-1063)
Wheel Skidder
525D (S/N: GKP1-450)
535D (S/N: MTP1-370)
545D (S/N: KGP1-243)
555D (S/N: PGY1-148)
Wheel Tractor-Scraper
621K (S/N: WTA1-118; WTE1-121)
623K (S/N: WTB1-214)
627K (S/N: WTC1-240)
637K (S/N: WTS1-108)
Wheeled Excavator
M318F (S/N: FB81-1; F8B1-994)
M320F (S/N: F2W1-504)
M322F (S/N: F2Z1-193)
Work Tool
MISC (S/N: 9981-UP)

Description Of Change: The new NOx sensors are resistant to currents and voltage from other electrical components.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

The new 441-5127 Nitrogen Oxide Sensor As (Engine Out) replaces the former 359-9171 Nitrogen Oxide Sensor As (Engine Out).

The new 441-5128 Nitrogen Oxide Sensor As (Tailpipe Out) replaces the former 359-9172 Nitrogen Oxide Sensor As (Tailpipe Out).

The new NOx sensors are adaptable to the above engines back to first production.

Caterpillar Information System:

New Oil Filter Used In 3600, G3600, and C280 Engines {1308} New Oil Filter Used In 3600, G3600, and C280 Engines {1308}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000} A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Toe) - Remove and Install
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C4.4 and C6.6 Engines Solenoid Valve - Test
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}
A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
SPF343 and SPF343C Trailer Mounted Pumpers Belts - Inspect/Adjust/Replace
C7.1 Marine Engine Electronic Control Module - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Passive) - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (PWM) - Test
C4.4 and C6.6 Engines Soot Sensor - Test
C4.4 and C6.6 Engines Speed Control (Analog) - Test
C4.4 and C6.6 Engines Speed Control (PWM) - Test
C4.4 and C6.6 Engines Speed/Timing - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Supply - Test
C175-16 Oil and Gas Generator Set After Stopping Engine
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Switch Circuits - Test - Air Filter Restriction Switch
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.