New Oil Filter Used In 3600, G3600, and C280 Engines {1308}
- Engine
- All 3600 Engines
- All C280 Engines
- All G3600
- All C280 Engines
Description Of Change: The new oil filter uses a new media which provides better filtration.
Adaptable To: The 179-1502 Oil Filter has been cancel replaced by the 485-4705 Oil Filter. The 485-4705 Oil Filter is a direct replacement for the 179-1502 Oil Filter and can be mixed with the 179-1502 Oil Filter.
Effectivity: All 3600, G3600, and C280 engines built after 13 May 2016 will have the 485-4705 Oil Filter.
Show/hide table
Illustration 1 | g06107587 |
Caterpillar Information System:
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000} A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Toe) - Remove and Install
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C4.4 and C6.6 Engines Solenoid Valve - Test
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}
A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
SPF343 and SPF343C Trailer Mounted Pumpers Belts - Inspect/Adjust/Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Model View Illustrations
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335} New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
C7.1 Marine Engine Electronic Control Module - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Passive) - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (PWM) - Test
C4.4 and C6.6 Engines Soot Sensor - Test
C4.4 and C6.6 Engines Speed Control (Analog) - Test
C4.4 and C6.6 Engines Speed Control (PWM) - Test
C4.4 and C6.6 Engines Speed/Timing - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Supply - Test
C175-16 Oil and Gas Generator Set After Stopping Engine
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Switch Circuits - Test - Air Filter Restriction Switch