The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} Caterpillar


The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}

Usage:

G3516H GLM
Engine
G3516H (S/N: GLM1-183; GLN1-137)

Description Of Change: Some G3516H packages shipped without the 379-5630 Hose.

Adaptable To:



Illustration 1g06107145

The following part is adaptable to some engines within the listed serial number, and are effective with all engines shipped with engine-mounted air cleaners after the listed serial numbers. The 379-5630 Hose was changed from the air cleaner gp to the housing gp. The change between the two groups were not done simultaneously which caused some engines to ship without the required hump hose.

Caterpillar Information System:

A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
SPF343 and SPF343C Trailer Mounted Pumpers Belts - Inspect/Adjust/Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Model View Illustrations
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Additional Messages
C7.1 Marine Engine Gear Group (Front) - Install
SPF343 and SPF343C Trailer Mounted Pumpers Fuel System - Prime
SPF343 and SPF343C Trailer Mounted Pumpers Air Shutoff - Test
C4.4 and C6.6 Engines Sensor Supply - Test
SPF343 and SPF343C Trailer Mounted Pumpers Product Lifting
C4.4 and C6.6 Engines Sensor Signal (Analog, Passive) - Test
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
C4.4 and C6.6 Engines Solenoid Valve - Test
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Toe) - Remove and Install
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000} A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
New Oil Filter Used In 3600, G3600, and C280 Engines {1308} New Oil Filter Used In 3600, G3600, and C280 Engines {1308}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335} New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
C7.1 Marine Engine Electronic Control Module - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Passive) - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (PWM) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.