DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Caterpillar


Model View Illustrations

Usage:

C1.1DE9.5 GB8
Az alábbi nézetek a kézikönyvben ismertetett generátorkészletek általános jellemzőit mutatják be. A gépkezelőnek tisztában kell lennie ezen elemek elhelyezkedésével. Az egyedi alkalmazásoknak köszönhetően az Ön generátora eltérhet a képen láthatótól.


Illusztráció 1g06103998
Zárt generátor-készlet oldalsó nézete
(1) Esővédő sapka a kipufogórendszerhez
(2) Üzemanyagbetöltő
(3) Motor levegőszűrő
(4) Vezérlőpanel
(5) Generátor
(6) Indítómotor
(7) Váz
(8) Generátor


Illusztráció 2g06104025
Nyitott generátor-készlet oldalsó nézete
(9) A motor-forgattyúház levegőztetője


Illusztráció 3g06104018
Nyitott generátor-készlet oldalsó nézete
(10) Hűtőrendszer-töltőnyílás sapkája
(11) Hűtő

Caterpillar Information System:

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Additional Messages
C7.1 Marine Engine Gear Group (Front) - Install
SPF343 and SPF343C Trailer Mounted Pumpers Fuel System - Prime
SPF343 and SPF343C Trailer Mounted Pumpers Air Shutoff - Test
C4.4 and C6.6 Engines Sensor Supply - Test
SPF343 and SPF343C Trailer Mounted Pumpers Product Lifting
C4.4 and C6.6 Engines Sensor Signal (Analog, Passive) - Test
Water Pump on Certain C4.4, C6.6, and C7.1 Engines {1361} Water Pump on Certain C4.4, C6.6, and C7.1 Engines {1361}
C4.4 and C6.6 Engines Sensor Signal (Analog, Active) - Test
C4.4 and C6.6 Engines Sensor Calibration Required - Test
C4.4 and C6.6 Engines Relay - Test - Start Relay
SPF343 and SPF343C Trailer Mounted Pumpers Belts - Inspect/Adjust/Replace
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
C4.4 and C6.6 Engines Solenoid Valve - Test
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Toe) - Remove and Install
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000} A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
New Oil Filter Used In 3600, G3600, and C280 Engines {1308} New Oil Filter Used In 3600, G3600, and C280 Engines {1308}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.