Fuel System - Prime
Show/hide table
Illustration 1 | g06103712 |
(1) Fuel priming pump plunger |
Note: Enable the starting system only after all maintenance has been completed.
Caterpillar Information System:
SPF343 and SPF343C Trailer Mounted Pumpers Air Shutoff - Test
C4.4 and C6.6 Engines Sensor Supply - Test
SPF343 and SPF343C Trailer Mounted Pumpers Product Lifting
C4.4 and C6.6 Engines Sensor Signal (Analog, Passive) - Test
Water Pump on Certain C4.4, C6.6, and C7.1 Engines {1361} Water Pump on Certain C4.4, C6.6, and C7.1 Engines {1361}
C4.4 and C6.6 Engines Sensor Signal (Analog, Active) - Test
C4.4 and C6.6 Engines Sensor Calibration Required - Test
C4.4 and C6.6 Engines Relay - Test - Start Relay
HPU300 Hydraulic Power Pack Wheel - Inspect
The 258-1543 Magnetic Switch Gp (DEF Heater Relay) May Leak AC Voltage to the Relay Case when Energized {1091, 7499} The 258-1543 Magnetic Switch Gp (DEF Heater Relay) May Leak AC Voltage to the Relay Case when Energized {1091, 7499}
G3512 Generator Set Engines Event Codes
C4.4 and C6.6 Engines Power Take-Off - Test
C7.1 Marine Engine Gear Group (Front) - Install
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Additional Messages
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Model View Illustrations
SPF343 and SPF343C Trailer Mounted Pumpers Belts - Inspect/Adjust/Replace
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Signal (Analog, Active) - Test
A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418} A New Inlet Manifold Air Temperature (IMAT) Switch Is Now Used on Certain G3412 Generator Set Engines {7400, 7418}
The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051} The Hump Hose is Missing on the Air Cleaner Group on Certain G3516H Engines {1051}
A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308} A New Oil Filter Base Stud Is Now Used on Certain 3500 Engines {1306, 1308}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Toe) - Remove and Install
C4.4 and C6.6 Engines Shutdown (Ground Level) - Test
C4.4 and C6.6 Engines Solenoid Valve - Test