A New Cylinder Liner Assembly And Piston Is Now Used For Certain 3516 Locomotive Engines {1201, 1216}
- Locomotive Engine
- 3516B (S/N: BCK1-UP)
Description Of Change: A new cylinder liner assembly and piston is now used to replace the legacy cylinder liner assembly that was used for certain 3516 Locomotive Engines.
Adaptable To: Table 1 contains the new part numbers that are available. Table 2 contains the effective serial numbers.
Show/hide table
| Qty | Part Number | Part Name |
|---|---|---|
| 16 | Cylinder Liners | |
| 16 | Sleeves | |
| 16 | Pistons |
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:BCK00427-UP |
Caterpillar Information System:
HPU300 Hydraulic Power Pack Hydraulic Oil Filter - Replace
C4.4 and C6.6 Engines Diagnostic Trouble Codes
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167} ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
349F and 352F Excavators Machine System Specifications Swing Drive - Left Swing Drive and Right Swing Drive
C175-16 and C175-20 Locomotive Engines Fuel Pump (High Pressure) - Remove and Install
C175-16 and C175-20 Locomotive Engines Air Inlet Manifold - Remove and Install
Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551} Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551}
C175-16 and C175-20 Locomotive Engines Valve Lifter - Install
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Does Not Respond
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000} M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
C12.9 Marine Engines Crankshaft Front Seal - Remove and Install
New Basic Engine Components Are Used in C175-16 Engines {1202, 1205} New Basic Engine Components Are Used in C175-16 Engines {1202, 1205}
Failure Analysis Report - AFA Good Report {0374, 1000} Failure Analysis Report - AFA Good Report {0374, 1000}
C4.4 and C6.6 Engines General Information
C4.4 and C6.6 Engines Welding Precaution
C4.4 and C6.6 Engines Component Location
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Belt (Second Stage) - Remove and Install
G3512 Generator Set Engines Manifold Air Pressure Sensor
G3512 Generator Set Engines Measuring Inlet Manifold Temperature
G3512 Generator Set Engines Restriction of Air Inlet and Exhaust
HPU300 Hydraulic Power Pack Before Starting Motor
G3612 and G3616 Engines Maintenance Interval Schedule - Engines With 10.5 or 11.1 Compression Ratio and Use Natural Gas
G3612 and G3616 Engines Maintenance Interval Schedule - Bio-Gas Engines
G3612 and G3616 Engines Maintenance Interval Schedule - Engines with a 9.2:1 Compression Ratio and Use Wellhead or Natural Gas