Air Inlet Manifold - Remove and Install
- Remove bolts (2) from cover (1). Position cover (1) out of the way.
Show/hide table
Illustration 2 g06093458 - Remove bolts (5), clamp (3), and air inlet manifold (4).
- Repeat Step 3 for the remaining air inlet manifolds.
Show/hide table
Illustration 3 g06093539 - Remove clamp (6) and elbow (7).
Show/hide table
Illustration 4 g06097986 - Remove bracket (10), bolts (8), elbow (9), elbow (12), the gaskets, and connector (11) .
- Repeat the procedure on the opposite side.
Show/hide table
Illustration 1 | g01242428 |
- Install elbow (9), elbow (12), the gaskets, connector (11) and secure the elbow with bolts (8) .
- Install bracket (10).
Show/hide table
Illustration 6 g06093539 - Install elbow (7) and clamp (6).
Show/hide table
Illustration 7 g06093458 - Install air inlet manifold (4), bolts (5), and clamp (3).
- Repeat Step 2 for the remaining air inlet manifolds.
Show/hide table
Illustration 8 g01242428 - Position cover (1) out of the way. Install cover (1) and bolts (2).
- Repeat the procedure on the opposite side.
Show/hide table
Illustration 5 | g06097986 |
Caterpillar Information System:
Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551} Front Suspension Failures May Occur on Certain 777D/777F/777G Off-Highway Trucks {7200, 7201, 7551}
C175-16 and C175-20 Locomotive Engines Valve Lifter - Install
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Pressure Does Not Respond
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000} M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
C12.9 Marine Engines Crankshaft Front Seal - Remove and Install
New Basic Engine Components Are Used in C175-16 Engines {1202, 1205} New Basic Engine Components Are Used in C175-16 Engines {1202, 1205}
A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207} A New Drive Bearing Is Now Used on Certain 3406E, C11, C13, C15, C16, and C18 Machine Engines {1207}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620} New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304} Identifying Oil Pumps on Certain C27, C32, and 3412 Engines {1304}
HPU300 Hydraulic Power Pack Daily Inspection
HPU300 Hydraulic Power Pack Storage
C12.9 Marine Engines Camshaft Bearings - Remove and Install
C175-16 and C175-20 Locomotive Engines Fuel Pump (High Pressure) - Remove and Install
349F and 352F Excavators Machine System Specifications Swing Drive - Left Swing Drive and Right Swing Drive
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167} ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
C4.4 and C6.6 Engines Diagnostic Trouble Codes
HPU300 Hydraulic Power Pack Hydraulic Oil Filter - Replace
A New Cylinder Liner Assembly And Piston Is Now Used For Certain 3516 Locomotive Engines {1201, 1216} A New Cylinder Liner Assembly And Piston Is Now Used For Certain 3516 Locomotive Engines {1201, 1216}
Failure Analysis Report - AFA Good Report {0374, 1000} Failure Analysis Report - AFA Good Report {0374, 1000}
C4.4 and C6.6 Engines General Information
C4.4 and C6.6 Engines Welding Precaution
C4.4 and C6.6 Engines Component Location
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Belt (Second Stage) - Remove and Install
G3512 Generator Set Engines Manifold Air Pressure Sensor