Alternator and Fan Belts - Replace
Show/hide table
图 1 | g06069465 |
典型示例 (1) 安装螺栓 (2) 调整螺栓 (3) 安装螺栓 |
注: 装上新皮带时,发动机运转 20 小时后检查皮带的张力。
有关皮带的安装和拆卸步骤,请参阅拆解和装配手册。
新皮带的皮带张力在
对于需要多根传动皮带的应用,要更换相配的整组传动皮带。 由于旧皮带已被拉伸,只更换一组中的一条皮带会使新皮带承受更多的负载。 额外负载就会加到新皮带上,从而造成皮带断裂。
Caterpillar Information System:
XQ60 Rental Generator Set Safety Messages
Process to Print Collage Schematics {0374, 1000, 7000} Process to Print Collage Schematics {0374, 1000, 7000}
797F Off-Highway Truck Diesel Exhaust Fluid - Fill
G3516 TA Engine Inlet Air Is Restricted
XQ60 Rental Generator Set Additional Messages
797F Off-Highway Truck Diesel Exhaust Fluid Filter - Replace
C12.9 Marine Engines Connecting Rod Bearings - Remove and Install
320 GC, 320 and 323 Excavator Swing Drive Oil Level - Check
320 GC, 320 and 323 Excavator Operator Controls
320 GC, 320 and 323 Excavator Monitoring System
330 GC and 330 Excavator Diesel Exhaust Fluid - Drain
320 GC, 320 and 323 Excavator Fuel System Water Separator - Drain
Marine Engine and Genset Panel II Alarm List
Marine Engine and Genset Panel II Menu Settings
G3516 TA Engine Timing - Calibrate
320 GC, 320 and 323 Excavator Service Interval Chart
320 GC, 320 and 323 Excavator System Pressure Release
320 GC, 320 and 323 Excavator Capacities (Refill)
320 GC, 320 and 323 Excavator Engine Starting with Auxiliary Start Receptacle - If Equipped
320 GC, 320 and 323 Excavator Fire Extinguisher Location
330 GC and 330 Excavator Parking
320 GC, 320 and 323 Excavator Specifications
320 GC, 320 and 323 Excavator Lifting Capacities - 320 GC Reach Boom
320 GC, 320 and 323 Excavator Lifting Capacities - 320 Reach Boom / Super Long Reach Boom