Make sure that all the messages are legible. Clean the messages or replace the messages if the words or images are unreadable. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.
| |
| Illustration 1 | g06069007 |
Engine Coolant Drain (1)
This message is on the side of the generator set toward the bottom of the generator set.
| |
| Illustration 2 | g01151053 |
This is the location of the engine coolant drain. Refer to this Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
 |
|
Personal injury can result from hot coolant. Any contact with hot coolant or with steam can cause severe burns. Allow cooling system components to cool before the cooling system is drained. |
Engine Oil Drain (2)
This message is on the side of the generator set toward the bottom of the generator set.
| |
| Illustration 3 | g01151083 |
This is the location of the engine oil drain. Refer to this Operation and Maintenance Manual, "Engine Oil and Filter - Change".
|
|
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |