Exhaust Manifold - Remove and Install
Start By:
- Remove Heat Exchanger
- Remove Turbocharger
- Remove bolts (2), exhaust manifold (1), and the gasket.
Show/hide table
| |
| Illustration 1 | g06063844 |
- Install exhaust manifold (1) in the reverse order of removal.
- Tighten bolts (2) to a torque of
60 ± 12 N·m (44.3 ± 8.9 lb ft) .Note: Torque sequence must start from the center of exhaust manifold (1) and move towards the ends in a spiral sequence.
- Tighten bolts (2) to a torque of
Caterpillar Information System:
Autonomous Stop (A-Stop) A-Stop Transmitter
3512E HD Petroleum Engines Additional Messages
Autonomous Stop (A-Stop) Testing the A-Stop System in the Field
3512E Engines Exhaust Cooler (NRS) - Remove and Install
Autonomous Stop (A-Stop) Resuming Autonomous Operation
Autonomous Stop (A-Stop) Clearing an A-Stop
Autonomous Stop (A-Stop) Activating an A-Stop
Autonomous Stop (A-Stop) Mode Indicator Lights
C12.9 Marine Engines Belt Tensioner - Remove and Install - Accessory Drive Belt Tensioner
Autonomous Stop (A-Stop) Using an A-Stop
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620} Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
C7.1 Marine Engine Turbocharger - Remove and Install
797F Off-Highway Truck Capacities (Refill)
G3512 Generator Set Engines Data Link - Test
Selective Catalytic Reduction Retrofit Aftertreatment Electronic Service Tools
Autonomous Stop (A-Stop) General Information
Autonomous Stop (A-Stop) System Components
3516C Generator Set Engines Air Inlet Manifold - Remove and Install
A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205} A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205}
A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557} A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557}
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
C12.9 Marine Engines Crankshaft - Remove and Install
3512E Engines Exhaust Gas Valve (NRS) - Remove and Install
G3516 TA Engine Data Link - Test