Autonomous Stop (A-Stop) Caterpillar


Testing the A-Stop System in the Field

Usage:

- AT6
An A-Stop transmitter can test the transmitter and autonomous machine system together by using the test button.

  1. Press and hold the test button for two or more seconds while in range of one or more Command machines.

  2. The Command machines that receive the test message will acknowledge the test by causing the lights to flash and horn to sound.

Caterpillar Information System:

3512E Engines Exhaust Cooler (NRS) - Remove and Install
Autonomous Stop (A-Stop) Resuming Autonomous Operation
Autonomous Stop (A-Stop) Clearing an A-Stop
Autonomous Stop (A-Stop) Activating an A-Stop
Autonomous Stop (A-Stop) Mode Indicator Lights
C12.9 Marine Engines Belt Tensioner - Remove and Install - Accessory Drive Belt Tensioner
Autonomous Stop (A-Stop) Using an A-Stop
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620} Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
C7.1 Marine Engine Turbocharger - Remove and Install
C12.9 Marine Engines Belt Tensioner - Remove and Install - Damper Drive Belt Tensioner
XQ60 Rental Generator Set Cooling System Coolant (DEAC) - Change
A New Tube and Support Is Now Used on Certain G3516 Engines {1380} A New Tube and Support Is Now Used on Certain G3516 Engines {1380}
3512E HD Petroleum Engines Additional Messages
Autonomous Stop (A-Stop) A-Stop Transmitter
C7.1 Marine Engine Exhaust Manifold - Remove and Install
797F Off-Highway Truck Capacities (Refill)
G3512 Generator Set Engines Data Link - Test
Selective Catalytic Reduction Retrofit Aftertreatment Electronic Service Tools
Autonomous Stop (A-Stop) General Information
Autonomous Stop (A-Stop) System Components
3516C Generator Set Engines Air Inlet Manifold - Remove and Install
A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205} A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205}
A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557} A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557}
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.