C12.9 Marine Engines Caterpillar


Belt Tensioner - Remove and Install - Supercharger Drive Belt Tensioner

Usage:

C12.9 PC7

Start By:

  1. Remove Belt Guard.

Removal Procedure



    Illustration 1g06061936

  1. Remove belt (1). Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace" for the correct procedure.


    Illustration 2g06062000

  2. Remove bolt (3) and tensioner (2).

Installation Procedure

  1. Install tensioner (2) in the reverse order of removal.

    1. Tighten bolt (3) to a torque of 61 ± 6 N·m (45 ± 4 lb ft).

Caterpillar Information System:

XQ60 Rental Generator Set Cooling System Coolant Sample (Level 2) - Obtain
XQ60 Rental Generator Set Cooling System Coolant Sample (Level 1) - Obtain
C9.3 Marine Auxiliary Engines Monitoring System
3512E Engines Check Valve (Fuel) - Remove and Install - Injector Back Pressure Regulator
3512E HD Petroleum Engine Fuel System Primary Filter/Water Separator - Drain
320 GC, 320 and 323 Excavator Access Door and Cover Locations
3516C Generator Set Engines Aftercooler - Remove and Install
3512E HD Petroleum Engine Overhaul Considerations
797 Off-Highway Truck Suspension Mounting (Front) - Check
3512E HD Petroleum Engine Engine Air Cleaner Differential Pressure - Check
3512E Engines Crankshaft - Remove and Install
Issues With the Wiring of the Generator Space Heater on Certain Flex Generator Packages {7274} Issues With the Wiring of the Generator Space Heater on Certain Flex Generator Packages {7274}
A New Tube and Support Is Now Used on Certain G3516 Engines {1380} A New Tube and Support Is Now Used on Certain G3516 Engines {1380}
XQ60 Rental Generator Set Cooling System Coolant (DEAC) - Change
C12.9 Marine Engines Belt Tensioner - Remove and Install - Damper Drive Belt Tensioner
C7.1 Marine Engine Turbocharger - Remove and Install
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620} Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Autonomous Stop (A-Stop) Using an A-Stop
C12.9 Marine Engines Belt Tensioner - Remove and Install - Accessory Drive Belt Tensioner
Autonomous Stop (A-Stop) Mode Indicator Lights
Autonomous Stop (A-Stop) Activating an A-Stop
Autonomous Stop (A-Stop) Clearing an A-Stop
Autonomous Stop (A-Stop) Resuming Autonomous Operation
3512E Engines Exhaust Cooler (NRS) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.