XQ60 Rental Generator Set Caterpillar


Cooling System Coolant Sample (Level 1) - Obtain

Usage:

C3.4B CF6
Note: Obtaining a Coolant Sample (Level 1) is optional if the cooling system is filled with Cat ELC (Extended Life Coolant). Cooling systems filled with Cat ELC should have a Coolant Sample (Level 2) that is obtained at the recommended interval as stated in the maintenance interval schedule.

Note: Obtain a Coolant Sample (Level 1) if the cooling system is filled with any other coolant instead of Cat ELC including the following coolants:

  • Commercial long life coolants that meet the Caterpillar Engine Coolant Specification -1 (Caterpillar EC-1)

  • Cat DEAC (Diesel Engine Antifreeze/Coolant)

  • Commercial heavy-duty coolant/antifreeze

Table 1
Recommended Interval 
Type of Coolant  Level 1  Level 2 
Cat DEAC  Every 250 service hours  2000 Hours or Every year(1) 
Conventional heavy duty-coolant 
Cat ELC or conventional EC-1 coolant  Optional  2000 Hours or Every year(1) 
(1) The Level 2 Coolant Analysis should be performed sooner if a problem is suspected or identified.


NOTICE

Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may contaminate the samples that are being drawn. This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers.


Note: Level 1 results may indicate a need for Level 2 Analysis.

Obtain the sample of the coolant as close as possible to the recommended sampling interval. To receive the full effect of S·O·S analysis, establish a consistent trend of data. To establish a pertinent history of data, perform consistent samplings that are evenly spaced. Supplies for collecting samples can be obtained from your Cat dealer.

Use the following guidelines for proper sampling of the coolant:

  • Complete the information on the label for the sampling bottle before you begin to take the samples.

  • Keep the unused sampling bottles stored in plastic bags.

  • Obtain coolant samples directly from the coolant sample port. You should not obtain the samples from any other location.

  • Keep the lids on empty sampling bottles until you are ready to collect the sample.

  • Place the sample in the mailing tube immediately after obtaining the sample to avoid contamination.

  • Never collect samples from expansion bottles.

  • Never collect samples from the drain for a system.

Submit the sample for Level 1 analysis.

For additional information about coolant analysis, see this Operation and Maintenance Manual, "Fluid Recommendations" or consult your Cat dealer.

Caterpillar Information System:

C9.3 Marine Auxiliary Engines Monitoring System
3512E Engines Check Valve (Fuel) - Remove and Install - Injector Back Pressure Regulator
3512E HD Petroleum Engine Fuel System Primary Filter/Water Separator - Drain
320 GC, 320 and 323 Excavator Access Door and Cover Locations
3516C Generator Set Engines Aftercooler - Remove and Install
3512E HD Petroleum Engine Overhaul Considerations
797 Off-Highway Truck Suspension Mounting (Front) - Check
3512E HD Petroleum Engine Engine Air Cleaner Differential Pressure - Check
3512E Engines Crankshaft - Remove and Install
Issues With the Wiring of the Generator Space Heater on Certain Flex Generator Packages {7274} Issues With the Wiring of the Generator Space Heater on Certain Flex Generator Packages {7274}
XQ60 Rental Generator Set Maintenance Interval Schedule
3512E Engines Pistons and Connecting Rods - Remove and Install
XQ60 Rental Generator Set Cooling System Coolant Sample (Level 2) - Obtain
C12.9 Marine Engines Belt Tensioner - Remove and Install - Supercharger Drive Belt Tensioner
A New Tube and Support Is Now Used on Certain G3516 Engines {1380} A New Tube and Support Is Now Used on Certain G3516 Engines {1380}
XQ60 Rental Generator Set Cooling System Coolant (DEAC) - Change
C12.9 Marine Engines Belt Tensioner - Remove and Install - Damper Drive Belt Tensioner
C7.1 Marine Engine Turbocharger - Remove and Install
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620} Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Autonomous Stop (A-Stop) Using an A-Stop
C12.9 Marine Engines Belt Tensioner - Remove and Install - Accessory Drive Belt Tensioner
Autonomous Stop (A-Stop) Mode Indicator Lights
Autonomous Stop (A-Stop) Activating an A-Stop
Autonomous Stop (A-Stop) Clearing an A-Stop
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.