C9.3 Tier 4 Final Engines Caterpillar


Fuel Injection Pump

Usage:

D6T 2B3


Illustration 1g03130476

Table 1
Specification for 493-9679 Fuel Injection Pump Gp 
Item  Qty  Part  Specification Description 
143-9392 Stud  Use the following procedure in order to tightening the studs and the bolts as shown in the Illustration 1: 
5P-8347 Bolt  1. Tighten to 19 ± 1 N·m (168 ± 95 lb in)
2. Again, turn to reach the final turn angle of 30 ± 1 degrees.
3. Final tightening torque should be 30 to 40 N·m (22 to 30 lb ft).
9S-8004 O-Ring Plug  Torque to 35 ± 4 N·m (26 ± 3 lb ft)
9S-8005 O-Ring Plug  Torque to 70 ± 5 N·m (52 ± 4 lb ft)
9S-8003 Plug  Torque to 20 ± 2 N·m (177 ± 18 lb in)
143-9392 Stud  Torque to 30 ± 4 N·m (266 ± 35 lb in)
6V-5135 Socket Setscrew  Torque to 25 ± 2 N·m (221 ± 18 lb in)
9S-4180 Plug  Torque to 4.5 ± 0.5 N·m (39.8 ± 4.4 lb in)
104-6385 Stud  Torque to 30 ± 4 N·m (266 ± 35 lb in)
10  6V-3940 Bolt  Torque to 30 ± 4 N·m (266 ± 35 lb in)
11  294-3031 Special Bolt  Torque to 9 ± 1 N·m (80 ± 9 lb in)
12  8C-8545 Bolt  Torque to 7.0 ± 0.4 N·m (62.0 ± 3.5 lb in)
13  6V-5845 Bolt  Before assembly, apply red Loctite 271 to the threads. 
1. Tighten to 200 ± 5 N·m (148 ± 4 lb ft) and rotate to 180 degrees counter clock wise.
2. Again tighten to 200 ± 5 N·m (148 ± 4 lb ft).
3. Turn to reach the final turn angle of 31 ± 2 degrees.
4. And final tightening torque should be 500 ± 50 N·m (369 ± 37 lb ft).

Caterpillar Information System:

Energy Storage System Cell Additive - Replenish
XQ570 Rental Generator Set Product Description
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Major)
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (In-Frame)
C9.3 Tier 4 Final Engines Cylinder Head Valves
C1.7 and C2.2 Industrial Engine Intake Manifold Air Temperature Is High
New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R} New Wheel Bearing Bolts are Now Used on Certain 777F and 777G Off-Highway Trucks {4006, 4008, 4051, 7551, 755R}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Air Cleaner Service Indicator - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Turbocharger - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Overhaul (Top End)
C175-20 Locomotive Engine Fuel Rail Pressure - Release
A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205} A New Damper Is Used on Certain 3512C International Maritime Organization (IMO) II Engines {1205}
C9.3 Tier 4 Final Engines Cylinder Head
C175-20 Locomotive Engine Dosing Control System Operation
Well Stimulation Pumps General Hazard Information
New Engine Software and Fuel Injectors Are Available For Certain C175 Commercial Engines {1290, 1920} New Engine Software and Fuel Injectors Are Available For Certain C175 Commercial Engines {1290, 1920}
C175 Tier 4 Final Engines for Off-Highway Trucks SCR Warning System Problem
Well Stimulation Pumps System Pressure Release
XQ570 Rental Generator Set Plate Locations and Film Locations
C18 Generator Set Engines Combustion Head - Remove and Install
New Software Is Used on Certain G3516C Generator Set Engines {1920, 7490, 7610, 7620} New Software Is Used on Certain G3516C Generator Set Engines {1920, 7490, 7610, 7620}
Technical Analysis 1 (TA1) Visual Inspection for Gas Engine Generator Sets {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Gas Engine Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Similar Product Support Literature Available For Military Machines {0374, 1000, 7000} Similar Product Support Literature Available For Military Machines {0374, 1000, 7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.