Energy Storage System Caterpillar


Current Sensor - Replace

Usage:

ES18H2.25 ZA5


  • Verify that the system is shut down. Locate the current sensor in the power module electronics bay.


    Illustration 1g06008691

  • Disconnect the cable connected to the current sensor.


    Illustration 2g06008694

  • Disconnect the positive cable from the top side of the contactor.


    Illustration 3g06008700

  • Remove the two mounting screws for the current sensor. Remove the sensor from the system.

  • Install the new sensor using the reverse order of removal.

  • Torque the mounting screws to 0.9 N m (8 lb in).

  • Torque the power connection at the contactor to 10 N m (90 lb in).
  • Caterpillar Information System:

    Energy Storage System Contactor - Replace
    Energy Storage System Carbon Dioxide (CO2) Scrubber - Replace
    C12.9 Marine Engines Air Cleaner - Remove and Install
    Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610} Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
    C12.9 Marine Engines Turbocharger - Inspect
    C175-20 Locomotive Engine DEF Pressure Is Low
    C12.9 Marine Engines Auxiliary Water Pump (Bronze Impeller) - Inspect
    C175-16 Locomotive Engine DEF Does Not Purge
    G3516 TA Engine Excessive Engine Oil Consumption - Inspect
    323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
    Installation and Initial Start-Up Procedure for G3600 A4 Engines {1000, 1900} Installation and Initial Start-Up Procedure for G3600 A4 Engines {1000, 1900}
    G3516 TA Engine Camshaft Timing
    Energy Storage System Fuse - Replace
    C175-16 Locomotive Engine Crankcase Pressure Is High
    XQ570 Rental Generator Set Safety Messages
    C175-20 Locomotive Engine DEF Tank Level Is Low
    G3508J, G3516J, and G3520J Engines Aftercooler - Remove and Install
    C175-16 Locomotive Engine Exhaust Differential Temperature Is High
    C175-20 Locomotive Engine Fuel Pressure Is High
    C1.7 and C2.2 Industrial Engine Speed/Timing - Test
    C12.9 Marine Engines Alternator - Remove and Install
    C18 Generator Set Maintenance Interval Schedule - Auxiliary
    G3512 Generator Set Engines Detonation - Test
    G3512 Generator Set Engines Electrical Power Supply - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.