New Contactor is Now Used as a Replacement for Prior Jacket Water Heater Relays for Certain C9, C15, and C18 Generator Set Engines {4460, 7426}
- Generator Set
- C15 GEN SET (S/N: NAP1-1681)
- C18 GEN SET (S/N: NAW1-91001)
- C9 GEN SET (S/N: NGP1-1052)
- C18 GEN SET (S/N: NAW1-91001)
Description Of Change: New 356-0169 Contactor will replace both previous 336-9185 Relay and 476-1062 Relay used in this application. The use of the contactor should prevent reoccurring relay failures on certain C9, C15, and C18 generator set engines.
Adaptable To: The following changes are adaptable to the engines within the listed serial numbers, and are effective with all engines after the listed serial numbers.
The effective engine serial numbers are listed in Table 1.
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:NAP01682-UP |
| S/N:NAW91002-UP |
| S/N:NGP01053-UP |
Caterpillar Information System:
G3516 TA Engine Air/Fuel Ratio Control - Adjust
G3516 TA Engine Ignition Timing - Adjust
A New NRS Cooler Assembly Is Now Used for Certain C15 and C18 Industrial Engines {108G} A New NRS Cooler Assembly Is Now Used for Certain C15 and C18 Industrial Engines {108G}
G3516 TA Engine Manifold Air Pressure Sensor
G3516 TA Engine Engine Governing - Adjust
New Pressure Sensor Group Is Now Used On Certain 3512 and 3516 Engines With EMCP 4.x Controls {1408} New Pressure Sensor Group Is Now Used On Certain 3512 and 3516 Engines With EMCP 4.x Controls {1408}
C175-16 Locomotive Engine Air Assist Pressure Is High
C175-16 Locomotive Engine Aftercooler Coolant Temperature Is High
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Aftercooler Coolant Pressure Is Low
G3516 TA Engine Camshaft
G3516 TA Engine Cooling System
C175-16 Locomotive Engine Air Assist Pressure Is Low
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
G3508J, G3516J, and G3520J Engines Exhaust Manifold - Remove - Water Cooled
XQ570 Rental Generator Set Model View Illustrations
G3516 TA Engine Camshaft Timing
Installation and Initial Start-Up Procedure for G3600 A4 Engines {1000, 1900} Installation and Initial Start-Up Procedure for G3600 A4 Engines {1000, 1900}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
G3516 TA Engine Excessive Engine Oil Consumption - Inspect
C175-16 Locomotive Engine DEF Does Not Purge
C12.9 Marine Engines Auxiliary Water Pump (Bronze Impeller) - Inspect