Expansion Tank - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03879606 - Disconnect hose assembly (1).
Show/hide table
Illustration 2 g03879612 - Disconnect tube assemblies (3) and harness assembly (4).
- Loosen clamp (6). Remove bolts (5) and expansion tank assembly (2).
- Install expansion tank assembly (2) in the reverse order of removal.
Caterpillar Information System:
C18 Marine Generator Set Generator Bearing - Inspect/Replace - SRMP Generator
C18 MAR GENSET Electric Power Generation Expansion Tank - Remove and Install - Jacket Water, Radiator Mounted
C32 Marine Generator Set Generator Bearing - Inspect/Replace
Reman Fuel Injectors Have Been Shipped Without Providing Trim Files for Certain C15 Engines{0785, 1290} Reman Fuel Injectors Have Been Shipped Without Providing Trim Files for Certain C15 Engines{0785, 1290}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703} 4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
G3606 and G3608 Engines Engine Oil Coolers - Remove and Install
G3606 and G3608 Engines Manual Barring Group - Remove and Install
C18 MAR GENSET Electric Power Generation Fan Drive - Remove and Install
XQ400 Power Module Generator Operation
C18 MAR GENSET Electric Power Generation Fan - Remove and Install
C175 Oil&Gas Offshore Engine Speed/Timing - Test
Torque Specifications Cable
C15 Generator Set Maintenance Interval Schedule - PRIME POWER
C15 Generator Set Maintenance Interval Schedule - Standby
C15 Generator Set Maintenance Interval Schedule - Emergency Standby Power
3516E Generator Set Engine Event Codes
558 Forest Machine Machine Systems Hydraulic Oil Cooler
C7.1 Commercial Marine Engine Cleanliness of Fuel System Components
3516E Generator Set Engine Diagnostic Trouble Codes
2015/09/17 New Software Is Used for Certain C10, C12, and C16 Engines {1920, 7620}
558 Forest Machine Machine Systems Check Valve (Return Makeup) - Slow Return Check Valve
Installation of the Dual Layered Shielded (DLS) Manifold System For Certain G3516 Engines {1052, 1059, 1063, 1067, 1071, 1380} Installation of the Dual Layered Shielded (DLS) Manifold System For Certain G3516 Engines {1052, 1059, 1063, 1067, 1071, 1380}
C18 MAR GENSET Electric Power Generation Radiator - Remove and Install
C18 MAR GENSET Electric Power Generation Radiator - Remove and Install - SCAC