C18 MAR GENSET Electric Power Generation Caterpillar


Fan - Remove and Install

Usage:

C18 SSM

Removal Procedure

Start By:

  1. Remove the radiator for the SCAC.


    Illustration 1g03879016

  1. Remove bolt. Using two people, remove fan assembly (2). The weight of fan assembly (2) is approximately 28 kg (62 lb).

Installation Procedure

  1. Using two people, install fan assembly (2) in the reverse order of removal. The weight of fan assembly (2) is approximately 28 kg (62 lb).

Caterpillar Information System:

C175 Oil&Gas Offshore Engine Speed/Timing - Test
Torque Specifications Cable
Torque Specifications Tie Rods
C13 Industrial Engine Model View Illustrations
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170} NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
XQ570 Rental Generator Set Maintenance Interval Schedule - Standby
XQ570 Rental Generator Set Maintenance Interval Schedule - Prime Power
Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070} Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070}
2015/09/10 An Improved Engine Prelube Pump Is Now Available for Certain Off-Highway Trucks {1307, 1319}
C8.7 Marine Engine Temperature and Pressure Sensor (Engine Oil) - Remove and Install
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606} Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N} New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
XQ400 Power Module Generator Operation
C18 MAR GENSET Electric Power Generation Fan Drive - Remove and Install
G3606 and G3608 Engines Manual Barring Group - Remove and Install
G3606 and G3608 Engines Engine Oil Coolers - Remove and Install
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703} 4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
Reman Fuel Injectors Have Been Shipped Without Providing Trim Files for Certain C15 Engines{0785, 1290} Reman Fuel Injectors Have Been Shipped Without Providing Trim Files for Certain C15 Engines{0785, 1290}
C32 Marine Generator Set Generator Bearing - Inspect/Replace
C18 MAR GENSET Electric Power Generation Expansion Tank - Remove and Install - Jacket Water, Radiator Mounted
C18 Marine Generator Set Generator Bearing - Inspect/Replace - SRMP Generator
C18 MAR GENSET Electric Power Generation Expansion Tank - Remove and Install
C15 Generator Set Maintenance Interval Schedule - PRIME POWER
C15 Generator Set Maintenance Interval Schedule - Standby
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.