An Improved Engine Prelube Pump Is Now Available for Certain Off-Highway Trucks {1307, 1319}
- OEM:
- CAT WDS (S/N: M3J1-UP)
- Off-Highway Trucks:
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
- 785D (S/N: DMC1-UP; MSY1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 789D (S/N: SPD1-UP; SHH1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: CBR1-UP)
- 793D (S/N: FDB1-UP)
- 793F AC (S/N: EMD1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
- 795F AC (S/N: ERM1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
An improved 116-7153 Prelubrication Pump and Motor Gp, 190-6126 Electric Motor Gp, and 228-5112 Prelubrication Oil Pump Gp is now available for the machines listed above.
The motor in the prelubrication oil pump are updated with new internal bushings.
The new improvement will provide better component reliability and improved service life.
Show/hide table
Illustration 1 | g03882452 |
(A) Motor Serial Number for the Prelube Pump (B) Serial number is engraved on the Pump housing |
The improved motor is effective with serial number 51071 and above. Refer to Illustration 1.
Caterpillar Information System:
C8.7 Marine Engine Temperature and Pressure Sensor (Engine Oil) - Remove and Install
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606} Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N} New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
C18 Marine Generator Set Product Storage
C18 Marine Generator Set Voltage Regulators
797F Off-Highway Truck Diesel Exhaust Fluid Injector - Replace - Emission Related Component
C7.1 Commercial Marine Engine Cylinder Head - Inspect
C18 Marine Generator Set Additional Messages
C8.7 Marine Engine Fuel Pressure Regulator - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (Swing Pressure)
C7.1 Marine Engine Engine Oil Cooler - Inspect
C18 Marine Generator Set Control Panel
Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070} Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070}
XQ570 Rental Generator Set Maintenance Interval Schedule - Prime Power
XQ570 Rental Generator Set Maintenance Interval Schedule - Standby
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170} NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
C13 Industrial Engine Model View Illustrations
Torque Specifications Tie Rods
Torque Specifications Cable
C175 Oil&Gas Offshore Engine Speed/Timing - Test
C18 MAR GENSET Electric Power Generation Fan - Remove and Install
XQ400 Power Module Generator Operation
C18 MAR GENSET Electric Power Generation Fan Drive - Remove and Install
G3606 and G3608 Engines Manual Barring Group - Remove and Install