Temperature and Pressure Sensor (Engine Oil) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | QTY     |
A     | 5P-5197     | External Pliers     | 1     |
B     | 430-4396     | 90 Degree Tip     | 1     |
C     | 129-1967     | Multipurpose Grease     | 1     |
- Use tooling (A) and tooling (B) to move retaining rings (1) .
Show/hide table
Illustration 1 | g03878278 |
- Push collars (2) into aftercooler.
- Remove bolt (3) and bolt (5) .
Show/hide table
Illustration 2 | g03878308 |
- Remove twelve bolts (4) and remove lower housing (6) .
- Remove bolts (7) and temperature and pressure sensor (8) .
Show/hide table
Illustration 3 | g03878319 |
- Disconnect harness assembly (9) .
Installation Procedure
- Install temperature and pressure sensor (8) in the reverse order of removal.
- Tighten bolts (7) to a torque of 9 ± 1 N·m (80± 9lb in).
- Tighten twelve bolts (4) to a torque of 24.5 ± 2.5 N·m (217 ± 22 lb in).
- Tighten bolt (5) to a torque of 49 ± 5 N·m (36 ± 4lb ft).
- Tighten bolt (3) to a torque of 49 ± 5 N·m (36 ± 4lb ft).
- Use Tooling (C) on collars (2) to ease installation.
Caterpillar Information System:
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606} Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N} New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
C18 Marine Generator Set Product Storage
C18 Marine Generator Set Voltage Regulators
797F Off-Highway Truck Diesel Exhaust Fluid Injector - Replace - Emission Related Component
C7.1 Commercial Marine Engine Cylinder Head - Inspect
C18 Marine Generator Set Additional Messages
C8.7 Marine Engine Fuel Pressure Regulator - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (Swing Pressure)
C7.1 Marine Engine Engine Oil Cooler - Inspect
C18 Marine Generator Set Control Panel
C18 Marine Generator Set Cold Weather Operation
2015/09/10 An Improved Engine Prelube Pump Is Now Available for Certain Off-Highway Trucks {1307, 1319}
Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070} Pre-Assembly of the Pinion Shaft For Well Stimulation Pumps {5070}
XQ570 Rental Generator Set Maintenance Interval Schedule - Prime Power
XQ570 Rental Generator Set Maintenance Interval Schedule - Standby
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170} NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
C13 Industrial Engine Model View Illustrations
Torque Specifications Tie Rods
Torque Specifications Cable
C175 Oil&Gas Offshore Engine Speed/Timing - Test
C18 MAR GENSET Electric Power Generation Fan - Remove and Install
XQ400 Power Module Generator Operation
C18 MAR GENSET Electric Power Generation Fan Drive - Remove and Install