Model View Illustrations
Show/hide table
| |
| Ilustrasi 1 | g03873056 |
|
Tampilan depan Genset Kapal Laut C18 Cat (1) Tangki ekspansi untuk sistem pendinginan mantel air (2) Filter oli engine (3) Filter bahan bakar (4) Katup pemilih bahan bakar (5) Pompa priming bahan bakar (6) Tangki ekspansi untuk sistem sirkuit dengan aftercooler terpisah (SCAC, separate circuit aftercooled) (7) Rumah untuk regulator temperatur (8) Katup pemutus bahan bakar (9) Port pengambilan sampel untuk oli engine (10) Tabung pengisian Oli Engine (11) Grup pelindung untuk sabuk dan alternator (12) Meteran tingkat oli engine (13) Port pengambilan sampel Oli Engine (14) Pemilih filter Oli Engine | |
Show/hide table
| |
| Ilustrasi 2 | g03873049 |
|
Tampilan samping kanan Genset Kapal Laut C18 Cat (15) Turbocharger (16) Cincin pengangkat engine (17) Tutup pengisi oli engine (18) Saluran masuk mantel air (19) Rumah deaerator (20) Pengukur inspeksi tingkat mantel air (21) Pengukur inspeksi tingkat mantel air (22) Tangki ekspansi mantel air (23) Tutup pengisian tangki ekspansi (24) Cincin pengangkat radiator (25) Radiator (26) Saluran keluar Aftercooler Sirkuit Terpisah (SCAC, Separate Circuit Aftercooling) (27) Saluran keluar mantel air (28) Meteran tingkat oli engine (29) Port pengambilan sampel oli engine (30) Oil cooler engine (31) Motor starter (32) Generator | |
Show/hide table
| |
| Ilustrasi 3 | g03879560 |
|
Tampilan samping kiri Genset Kapal Laut C18 Cat (24) Cincin pengangkat radiator (33) Tangki ekspansi Aftercooler Sirkuit Terpisah (SCAC) (34) Tutup pengisian tangki SCAC (35) Pengukur inspeksi tangki ekspansi SCAC (36) Tangki ekspansi SCAC (37) Pengukur inspeksi tangki ekspansi SCAC (38) Aftercooler (39) Filter Ventilasi Karter Tertutup (CCV, Close Crankcase Ventilation) (40) Air cleaner (41) Panel Kontrol Generator Kapal Laut IIIb ((MGCP, Marine Generator Kontrol Panel) IIIb) (Opsional) (42) Modul Kontrol Elektronik (ECM, Electronic Control Module) (43) Saluran masuk SCAC (44) Saluran keluar SCAC | |
Caterpillar Information System:
C18 Marine Generator Set Product Lifting
2015/08/10 A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
C8.7 Marine Engine Crankshaft - Remove and Install
C8.7 Marine Engine Bearing Clearance - Check
C280 Marine Engines Pistons, Rings and Connecting Rods
C280 Marine Engines Fuel Injector
A New Exhaust Manifold Is Used on Certain 3524B Engines {1059, 1071} A New Exhaust Manifold Is Used on Certain 3524B Engines {1059, 1071}
C8.7 Marine Engine Fuel Injection Pump - Remove and Install
2015/08/28 New Turbochargers Are Available for Certain C13 and C15 Truck Engines {1052, 1053}
A New Air Inlet Elbow, Air Inlet Lines, and Fuel Lines Are Used for Certain G3500B Engines {1052, 1071, 1274} A New Air Inlet Elbow, Air Inlet Lines, and Fuel Lines Are Used for Certain G3500B Engines {1052, 1071, 1274}
2015/08/21 A New Air Inlet Elbow, Air Inlet Lines, and Fuel Lines Are Used for Certain G3500C and G3500E Engines {1071, 1087, 1274}
2015/08/07 A New Fuel Line Is Available for Certain C7.1 Engines {1274}
Improved Camera Is Now Available for Cat® Object Detection And Vision Applications On Certain Cat Products {7348} Improved Camera Is Now Available for Cat® Object Detection And Vision Applications On Certain Cat Products {7348}
2015/08/07 New Monitor Software Gp Is Now Used on Certain G3508, G3512, and G3516 Engines {7490}
2015/09/17 New Spark Plugs Are Used on Certain G3600 Engines {1555}
Rim Inspection Guidelines {4202, 4209} Rim Inspection Guidelines {4202, 4209}
C18 Marine Engine Maintenance Interval Schedule
C8.7 Marine Engine Crankshaft Front Seal - Remove and Install
C8.7 Marine Engine Crankshaft Main Bearings - Remove and Install
C8.7 Marine Engine Crankshaft Rear Seal - Remove and Install
C18 Marine Generator Set Product Description
2015/08/07 New Engine Software Is Used on Certain C18 Generator Sets {1920, 7620}
C8.7 Marine Engine Connecting Rod Bearings - Remove and Install
C18 Marine Generator Set Safety Messages