Piston Motor (Hydrostatic) - Disassemble - CTL
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 136-1452 | 挡圈钳 | 1 |
B | 6V-2062 | 提示 | 1 |
C | 1P-0074 | 滑锤拉拔器总成 | 1 |
D | 4C-5651 | 带螺纹的接头 | 1 |
E | 1P-0510 | 冲头总成 | 1 |
F | 8H-0663 | 轴承拉拔器总成 | 1 |
G | 426-2717 | 反作用板 | 1 |
8T-7338 | 螺栓 | 4 | |
9X-8268 | 垫圈 | 4 | |
H | 5F-7339 | 齿座 | 1 |
J | 385-8578 | 液压扳手 | 1 |
385-8589 | 反作用力臂组件 | 1 | |
426-2719 | 缸体总成 | 1 | |
J | 132-8126 | 液压扳手(1) | 1 |
237-3952 | 反作用力臂组件(2) | 1 | |
426-2720 | 缸体总成(3) | 1 | |
K | 308-5676 | 活动扳手组件(4) | 1 |
329-1669 | 活动扳手组件(5) | 1 | |
308-5675 | 驱动器组件 | 1 | |
426-2723 | 齿座 | 1 | |
L | 385-8479 | 液压泵总成
115v |
1 |
384-8916 | 液压泵总成
208-240v |
1 | |
M | 1H-3110 | 轴承拉拔器总成 | 1 |
Show/hide table
(1) | 可用于代替 385-8578 液压扳手。 |
(2) | 仅配合 132-8126 液压扳手使用。 |
(3) | 仅配合 132-8126 液压扳手使用。 |
(4) | 6 销 |
(5) | 7 销 |
开始:
- 拆下活塞马达。
- 使用适当的压具以及工具 (A) 和工具 (B),将挡圈 (1) 从缸盖 (2) 上拆下。
Show/hide table
图 2 g03766438 - 拆下板 (3)。
Show/hide table
图 3 g03766440 - 拆下弹簧 (4)。
Show/hide table
图 4 g03766479 - 使用工具 (C) 和工具 (D) 拆下活塞 (5)。
Show/hide table
图 5 g03766496 - 拆下螺栓 (7)、转速传感器 (6) 和 O 形密封圈。
Show/hide table
图 6 g03766501 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 将螺栓 (8) 从泵头 (2) 上拆下。
Show/hide table
图 7 g03766518 - 拆下泵头 (2),同时推压轴 (12),以避免旋转总成与泵头 (2) 一起拆下。
- 拆下摩擦片 (9)、板 (10) 和齿轮 (11)。
Show/hide table
图 8 g03768399 - 将 O 形密封圈 (13)、支承环 (14) 和 O 形密封圈 (15) 从泵头 (2) 上拆下。
Show/hide table
图 9 g03771136 Show/hide table图 10 g03771216 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 将螺塞 (15)、O 形密封圈 (19)、弹簧 (18)、垫圈 (17) 和冲洗滑阀 (16) 从泵头 (2) 上拆下。
Show/hide table
图 11 g03772724 Show/hide table图 12 g03772728 - 拆下螺塞 (20)、O 形密封圈 (23)、滑阀 (21) 和嵌件 (22)。
Show/hide table
图 13 g03772742 Show/hide table图 14 g03772765 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 拆下螺塞 (24)、O 形密封圈 (27)、弹簧 (26) 和安全阀 (25)。
Show/hide table
图 15 g03772776 - 拆下螺塞 (28)、螺塞 (29) 和 O 形密封圈。
Show/hide table
图 16 g03772790 Show/hide table图 17 g03772801 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 拆下螺塞 (30) 和 O 形密封圈。
- 拆下螺塞 (31)、O 形密封圈 (34)、弹簧 (33) 和垫圈 (32)。
Show/hide table
图 18 g03773292 - 从缸盖 (2) 上拆下配流盘 (35)。
Show/hide table
图 19 g03773315 - 使用工具 (E) 将密封 (37) 和轴承 (36) 从泵头上拆下。
- 拆下螺塞 (36)、O 形密封圈 (39)、弹簧 (38) 和阀 (37)。
Show/hide table
图 20 g03773464 - 拆下轴组件 (12)、夹子 (38)、轴承座圈 (39) 和活塞筒组件 (40)。
Show/hide table
图 21 g03773473 - 将活塞组件 (41)、护圈 (42) 和轴承 (43) 从活塞筒组件 (40) 上拆下。
Show/hide table
图 22 g03773491 - 将销 (44) 从活塞筒组件 (40) 上拆下。
Show/hide table
图 23 g03776150 Show/hide table图 24 g03355421 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 利用工具 (E) 和适当的压具压缩弹簧 (48)。
- 将挡圈 (45)、护圈 (47) 和弹簧 (48) 从活塞筒组件 (40) 上拆下。
Show/hide table
图 25 g03362974 - 拆下旋转斜盘 (49)。
Show/hide table
图 26 g03776159 - 使用工具 (E) 和工具 (M) 将轴承座圈 (50) 从轴 (12) 上拆下。
Show/hide table
图 27 g03776175 - 拆下导向装置 (51) 和轴承 (52)。
- 拆下 O 形密封圈 (53) 和 (54)。
Show/hide table
图 28 g03355485 - 将工具 (G) 连接到壳体 (55) 上。
Show/hide table
图 29 g03355473 - 使用工具 (B) 拆下挡圈 (56)。
- 拆下塞 (57) 和 O 形密封圈。
Show/hide table
图 30 g03355503 - 使用工具 (C) 和工具 (H) 拆下盖 (58)。
Show/hide table
图 31 g03355505 - 拆下 O 形密封圈 (59) 和齿轮架组件 (60)。
Show/hide table
图 32 g03355791 - 拆下齿轮 (61)。 拆下挡圈 (62)。 拆下齿轮 (63)。
- 卸下挡圈 (64) 和齿轮 (65)。
Show/hide table
图 33 g03727570 - 拆下挡圈 (66)。 拆下齿轮 (67)。
- 拆下轴承座圈 (68)。
Show/hide table
图 34 g03362981 - 使用工具 (E) 拆下轴承 (69) 和轴密封件 (70)。
Show/hide table
图 35 g03355806 Show/hide table图 36 g03355801 - 钻锁紧螺母 (71)。 安装工具 (K)。 将工具 (J) 和工具 (L) 连接到工具 (K) 和工具 (G) 上。
- 将螺母 (71) 从心轴上拆下。
Show/hide table
图 37 g03355938 - 使用工具 (M) 和适当的压具,将心轴 (72) 从壳体 (55) 上拆下。
Show/hide table
图 38 g03355939 Show/hide table图 39 g03775471 - 拆下 Duo-Cone 密封件 (73) 和 (74)。
Show/hide table
图 1 | g03766418 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
Caterpillar Information System:
AP255E Asphalt Paver Machine Systems Hopper - Remove and Install
AP255E Asphalt Paver Machine Systems Hydraulic Cylinder (Tow Point) - Remove and Install
2015/05/25 New Cab Blower Fan Assembly Is Now Used on Certain Off-Highway Trucks {7316}
AP255E Asphalt Paver Machine Systems Hydraulic Cylinder (Screed Hoist) - Remove and Install
777E Off-Highway Truck Engine Crankcase Breather - Clean
777E Off-Highway Truck Engine Oil Level - Check
AP255E Asphalt Paver Machine Systems Hydraulic Cylinder (Hopper Hoist) - Remove and Install
239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Assemble - CTL
C4.4 and C7.1 Engines General Information
2015/07/07 Improved Steering Lines Group Is Now Used on Certain 777G Off-Highway Trucks {4304}
Avoid Contaminating the Oil System During Oil Changes on Certain C175 Machine Engines {1302, 1306, 1308} Avoid Contaminating the Oil System During Oil Changes on Certain C175 Machine Engines {1302, 1306, 1308}
773E Off-Highway Truck Body Retaining Pin
2015/08/05 The Orientation of the Low Pressure Fuel System Check Valve has been Improved on Certain 793F Off-Highway Trucks {1274}
CS54B, CP54B and CS64B Vibratory Soil Compactors Safety Messages
CS54B, CP54B and CS64B Vibratory Soil Compactors Operation
CS54B, CP54B and CS64B Vibratory Soil Compactors Sound Information and Vibration Information
3516E Engines for 793D Off-Highway Trucks Electronic Service Tools
CS54B, CP54B and CS64B Vibratory Soil Compactors Selective Catalytic Reduction Warning System
3516E Engines for 793D Off-Highway Trucks System Overview
CS54B, CP54B and CS64B Vibratory Soil Compactors Monitoring System
An Improved Top Tank Assembly for the Air to Air Aftercooler is Now Used on 797F Off-Highway Trucks {1063} An Improved Top Tank Assembly for the Air to Air Aftercooler is Now Used on 797F Off-Highway Trucks {1063}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 3895 - FMI 04
2015/05/29 Improved Retention For The Shunt Tank Hose In The Coolant Tank Group Is Now Used On Certain 16M Motor Graders {1051, 1054}