G3600 A4 Engines Caterpillar

Camshaft Bearing Position

Usage:

G3612 BB2

Show/hide table




Illustration 1	g03162857
Right side view

Show/hide table

Table 1
Specification for 383-1771 Cylinder Block Gp
Item	Qty	Part	Specification Description
The right camshaft bearings are installed into the cylinder block at the following positions:
-	-	-	Distance (A) is 3679.0 mm (144.84 inch).
-	-	-	Distance (B) is 3219.0 mm (126.73 inch).
-	-	-	Distance (C) is 2759.0 mm (108.62 inch).
-	-	-	Distance (D) is 2299.0 mm (90.51 inch).
-	-	-	Distance (E) is 1839.0 mm (72.40 inch).
-	-	-	Distance (F) is 1379.0 mm (54.29 inch).
-	-	-	Distance (G) is 919.0 mm (36.18 inch).
-	-	-	Distance (H) is 459.0 mm (18.07 inch).

Show/hide table




Illustration 2	g03162877
Left side view

Show/hide table

Table 2
Item	Qty	Part	Specification Description
The left camshaft bearings are installed into the cylinder block at the following positions:
-	-	-	Distance (J) is 3761.0 mm (148.07 inch).
-	-	-	Distance (K) is 3301.0 mm (129.96 inch).
-	-	-	Distance (L) is 2841.0 mm (111.85 inch).
-	-	-	Distance (M) is 2381.0 mm (93.74 inch).
-	-	-	Distance (N) is 1921.0 mm (75.63 inch).
-	-	-	Distance (P) is 1461.0 mm (57.52 inch).
-	-	-	Distance (R) is 1001.0 mm (39.41 inch).
-	-	-	Distance (S) is 541.0 mm (21.30 inch).
-	-	-	Distance (T) is 81.0 mm (3.19 inch).

Caterpillar Information System:

G3600 A4 Engines Water Temperature Regulator

G3600 A4 Engines Cylinder Liner

330F MHPU Mobile Hydraulic Power Unit Machine System Antenna

G3600 A4 Engines Flywheel

G3600 A4 Engines Engine Lifting Bracket

G3600 A4 Engines Vibration Damper

G3600 A4 Engines Vibration Damper

G3600 A4 Engines Crankshaft Seals

G3600 A4 Engines Turbocharger

2015/04/10 Some Temperature Regulator Gp On C15 and C18 Jacket Water Heater Systems Not Assembled Correctly {1355, 1383}

G3612 and G3616 Engines Fuel Lines - Remove and Install

G3612 and G3616 Engines Air Inlet Restriction Sensor - Remove and Install

G3600 A4 Engines Housing (Front)

G3600 A4 Engines Water Temperature Regulator

3512C HD SR500 Generator Sets Fluid Recommendations

G3600 A4 Engines Gear Group (Rear)

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000} General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

C9.3 Marine Auxiliary and Generator Set Engine Engine Monitoring System

3512E Petroleum Engine Air Inlet and Exhaust System Operation

G3600 A4 Engines Housing (Rear)

330F MHPU Mobile Hydraulic Power Unit Machine System Communication Electronic Control Module (Product Link)

G3600 A4 Engines Air Cleaner

G3600 A4 Engines Electronic Control (Combustion Sensor)

G3600 A4 Engines Cover Cylinder