Flywheel
Show/hide table
Illustration 1 | g03819061 |
Show/hide table
Specification for 379-9041 Flywheel Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 12 | 2H-3745 Bolt | Torque to |
2 | 20 | 6V-5605 Bolt(1) | Use the following procedure to tighten the bolts:
1. Torque to 2. Again, tighten the bolts to an additional angle of 90 degrees + 2 degrees - 5 degrees. |
3 | 20 | 3S-1349 Hard Washer | Before assembly, apply Loctite C5A Copper Anti-Seize to washer face and bolt threads. |
Show/hide table
(1) | Do not reuse bolts. |
Caterpillar Information System:
G3600 A4 Engines Engine Lifting Bracket
G3600 A4 Engines Vibration Damper
G3600 A4 Engines Vibration Damper
G3600 A4 Engines Crankshaft Seals
G3600 A4 Engines Turbocharger
2015/04/10 Some Temperature Regulator Gp On C15 and C18 Jacket Water Heater Systems Not Assembled Correctly {1355, 1383}
G3612 and G3616 Engines Fuel Lines - Remove and Install
G3612 and G3616 Engines Air Inlet Restriction Sensor - Remove and Install
3406C Generator Sets Maintenance Interval Schedule - Standby
3512C HD SR500 Generator Sets Overhaul Considerations
C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump - Install
C2.2 Engines for Caterpillar Built Machines Throttle Valve (Intake Air) - Remove
330F MHPU Mobile Hydraulic Power Unit Machine System Antenna
G3600 A4 Engines Cylinder Liner
G3600 A4 Engines Water Temperature Regulator
G3600 A4 Engines Camshaft Bearing Position
G3600 A4 Engines Housing (Front)
G3600 A4 Engines Water Temperature Regulator
3512C HD SR500 Generator Sets Fluid Recommendations
G3600 A4 Engines Gear Group (Rear)
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000} General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
C9.3 Marine Auxiliary and Generator Set Engine Engine Monitoring System
3512E Petroleum Engine Air Inlet and Exhaust System Operation
G3600 A4 Engines Housing (Rear)