CB54 and CB64 Vibratory Asphalt Compactors Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.

The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.

Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.

Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

When Required

Battery - Clean/Check
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Circuit Breakers - Reset
Drum Scrapers - Inspect/Adjust/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Compartment - Clean
Film (Product Identification) - Clean
Fuel System - Prime
Fuel Tank Water and Sediment - Drain
Fuses - Replace
High Intensity Discharge Lamp (HID) - Replace
Oil Filter - Inspect
Radiator Core - Clean
Water Spray Nozzles - Clean
Water Spray System - Drain

Every 6000 Service Hours or 3 Years

Cooling System Coolant Extender (ELC) - Add

Every 12 000 Service Hours or 6 Years

Cooling System Coolant (ELC) - Change

Every 10 Service Hours or Daily

Backup Alarm - Test
Cooling System Coolant Level - Check
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Seat Belt - Inspect
Water Spray System Filter - Clean
Water Tank Strainer - Clean and Inspect

Every 50 Service Hours or Weekly

Pivot Bearing (Compaction Measurement Mounting) - Lubricate
Ring Bearings - Lubricate
Vibratory Drive Shaft - Lubricate

Every 100 Service Hours or 2 Weeks

Fuel System Water Separator - Drain

Initial 250 Service Hours

Drum Drive Planetary Oil - Change

Every 250 Service Hours or 3 Months

Drum Drive Planetary Oil Level - Check
Eccentric Weight Housing Oil Level - Check
Engine Oil Sample - Obtain
Offset Cylinder Ends - Lubricate
Steering Cylinder Ends - Lubricate

Initial 500 Service Hours

Engine Valve Lash - Check

Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)

Cooling System Coolant Sample (Level 2) - Obtain

Every 500 Service Hours or 3 Months

Cooling System Coolant Sample (Level 1) - Obtain

Every 500 Service Hours or 6 Months

Braking System - Test
Cooling System Coolant Sample - Obtain
Drum Drive Planetary Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Fuel Filter Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Sample - Obtain

Every 1000 Service Hours

Drum Drive Planetary Oil - Change

Every 1000 Service Hours or 1 Year

Cooling System Pressure Cap - Clean/Replace
Engine Mounts - Inspect
Engine Valve Lash - Check
Hydraulic System Oil Filter - Replace
Hydraulic Tank Vent - Replace
Rollover Protective Structure (ROPS) - Inspect
Vibratory Frequency - Check

Every 2000 Service Hours or 1 Year

Engine Valve Rotators - Inspect

Every 2000 Service Hours or 2 Years

Cooling System Water Temperature Regulator - Replace
Crankshaft Vibration Damper - Inspect
Hydraulic System Oil - Change

Every Year

Cooling System Coolant Sample (Level 2) - Obtain
Pivot Bearing (Compaction Measurement Mounting) - Replace

Every 3 Years

Seat Belt - Replace

Every 3000 Service Hours or 3 Years

Eccentric Weight Housing Oil - Change