Front Idler (Steel Track)
Show/hide table
Illustration 1 | g06253282 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 4D-3882 Bearing Cone | Before assembly, pack the bearing with 458-0188 Grease. |
2 | 1 | 006-7232 Bearing Cone | Before assembly, pack the bearing with 458-0188 Grease. |
3 | 1 | 269-2218 Lock Plate | Bend up the lock plate against the flat side of the bolt head. |
4 | 3 | 8T-4139 Bolt | Use the following procedure in order to adjust the bearings: 1. Adjust the bearing end play within 2. Use the 3. Tighten the three M12 bolts to a torque of 4. Loosen the three M12 bolts and again tighten the three M12 bolts to 5. Measure the distance between the face of the gauge block and the end of the spindle. Take an average of the three measurements. 6. Take an average of the three measurements from Step 5 and minus the gauge block from Step 2. Then, add 7. Install the shim packs (5) and tighten the bolts to |
5 | 3 | 7R-0229 Shim | Thickness is |
3 | 7R-0230 Shim | Thickness is |
|
5 | 7R-0231 Shim | Thickness is |
|
6 | 1 | 8C-8422 Sealant | Before assembly, apply the sealant between the plate cover and the idler. |
Caterpillar Information System:
AP655F and AP655F L Asphalt Paver Machine Systems Pump Drive Group - Mounting
AP655F and AP655F L Asphalt Paver Machine Systems Air Lines (Aftercooler)
AP655F and AP655F L Asphalt Paver Machine Systems Air Lines (Aftercooler)
AP655F and AP655F L Asphalt Pavers Propel System Final Drive (Mobil-Trac)
735C, 745C and 740C EJECTOR Articulated Truck Systems Heater Lines
AP655F and AP655F L Asphalt Pavers Propel System Final Drive (Steel Track)
C7.1 Engines Valve Position - Test
AP600F Asphalt Pavers Machine Systems Coolant Lines
AP555F Asphalt Paver Machine Systems Oscillating Hitch
AP555F Asphalt Paver Machine Systems Conveyor Drive (Drag)
AP655F and AP655F L Asphalt Pavers Propel System Hydraulic Cylinder (Track Tension)
AP655F and AP655F L Asphalt Paver Machine Systems Main Frame
AP655F and AP655F L Asphalt Paver Machine Systems Pump Drive Group - Mounting
735C, 740C EJECTOR and 745C Articulated Trucks Transmission Clutch Slips
RM500B Reclaimer Mixer Power Train Location of Electrical Components (Propel System)
RM500B Reclaimer Mixer Power Train Location of Hydraulic Components (Propel System)
C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
RM500B Reclaimer Mixer Power Train Piston Pump (Propel)
416F2, 420F2 IT, 420F2 ST, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Engine Supplement Engine - Install
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Alternator - Remove and Install
C7.1 Engines Service Tool Features
RM500B Reclaimer Mixer Power Train Piston Motor (Front Propel)
RM500B Reclaimer Mixer Power Train Piston Motor (Rear Propel)
RM500B Reclaimer Mixer Power Train Final Drive Planetary