Winch Oil Level - Check
Show/hide table
 |
|
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
The boom winch has a separate oil supply that requires the oil level to be checked periodically. However, the hook winch is pressure lubricated with hydraulic oil and does not require the oil level to be checked by the operator.
- Park the machine on level ground. Turn OFF the engine.
Show/hide table
Illustration 1 g03776239 Front view
(1) Oil breather
(2) Oil filler plug
(3) Oil drain plug - Remove oil filler plug (2) in order to check the oil level. The oil level should be maintained to the bottom of the oil filler plug hole.
- Add oil, if necessary.
Note: Oil breather plug (1) is a vent plug. Do not alter or remove the vent. Do not grease the vent plug. Do not install a solid plug at the breather port.
- Install oil filler plug (2).
Check for oil leaks around the covers and around the hoses. Repair any oil leaks.
Note: Turn off the engine if you repair any leaking hoses.
Reference: See “Lubricant Viscosities and Refill Capacities” in this manual for the proper oil type.
Caterpillar Information System:
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train NoSPIN Differential - Test - Before Installation
PL72 Pipelayer Winch Oil - Change
F2 Series Backhoe Loaders Monitoring System Service Menu
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Transmission (Power Shift) - Install
PL72 Pipelayer Winch Frame Mounting - Inspect
C7.1 Engines NRS Mass Flow Rate Problem
F2 Series Backhoe Loaders Monitoring System Settings Menu
C7.1 Engines NRS Exhaust Gas Temperature Is High
CP34 and CS34 Vibratory Soil Compactors Engine Oil Level - Check
422F2, 427F2, 428F2, 432F2 and 434F2 Backhoe Loaders Transmission (Standard Shift) Transmission (Standard Shift)
CP34 and CS34 Vibratory Soil Compactors Eccentric Weight Housing Oil - Change
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209} Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209}
735C and 745C Articulated Trucks Belt - Inspect/Replace
CP34 and CS34 Vibratory Soil Compactors Engine Oil Sample - Obtain
CP34 and CS34 Vibratory Soil Compactors Engine Oil and Filter - Change
735C and 745C Articulated Trucks Machine Systems Machine Preparation for Testing and Adjusting
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Remove and Install - Standard Flow
2015/01/23 Instructions to Disable Compatibility Mode For CAESoffice Executable On Windows 7 Operating Systems {7490, 7600, 7605}
735C and 745C Articulated Trucks Machine Systems System Pressure - Release
2015/01/27 Uninstalling Updates and Disabling Automatic Windows Updates Enables "B" Snippets Within METSmanager {7604}
735C and 745C Articulated Trucks Machine Systems Hydraulic Oil Contamination - Test
745 Articulated Truck Fuel System - Prime
2014/12/17 Improved LARN Antenna Now Used on CAT ® Command for Underground Equipped Machines {7338, 733T}