CP34 and CS34 Vibratory Soil Compactors Machine Systems Caterpillar


Wheel and Tire - Remove and Install

Usage:

CS-34 514

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
180-3033  Repair Stand Set 

------ WARNING! ------

Accidental machine starting can cause injury or death to personnel working on the machine.

To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.

Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.




    Illustration 1g01081913

  1. Engage the parking brake. Place wooden wedges in front of the drum and behind the drum.

  2. Use a suitable lifting device to raise the rear of the machine until the tires are just off the floor. The weight of the machine at the axle is approximately 2500 kg (5500 lb). Install Tooling (A) under the axle of the machine.


    Illustration 2g01081914

  3. Attach a suitable lifting device to the wheel and tire (1). Remove nuts (2) and wheel and tire (1). The weight of wheel and tire (1) is approximately 100 kg (220 lb).

Installation Procedure

Table 2
Required Tools 
Tool  Part Number  Part Description  Qty 
180-3033  Repair Stand Set 

  1. Install wheel and tire (1) in the reverse order of removal.

    1. Tighten the lug nuts to a torque of 470 ± 50 N·m (345 ± 37 lb ft).

Caterpillar Information System:

CP34 and CS34 Vibratory Soil Compactors Machine Systems Seat - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Tank - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Leveling Blade - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Metering Pump (Steering) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Fuel Tank - Remove and Install
RM500B Reclaimer Mixer Machine Systems Hydraulic Oil Cooler Lines Group
793F Off-Highway Truck Fuel Correction Factor - Set
735C and 745C Articulated Trucks Machine Systems Transfer Gear Lubrication System
2014/11/14 New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
735C and 745C Articulated Trucks Machine Systems Torque Converter
RM500B Reclaimer Mixer Machine Systems Hydraulic Oil Cooler Lines Group
RM500B Reclaimer Mixer Machine Systems Hood
CP34 and CS34 Vibratory Soil Compactors Machine Systems Gear Motor (Vibratory) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Vibratory Valve - Remove and Install
2014/12/11 Radiator Guard Kit Now Available for Certain R2900G and R3000H Load Haul Dump Machines {7050}
Procedure to Rework the Radiator Guard on Certain R2900G and R3000H Load Haul Dump Machines{7050} Procedure to Rework the Radiator Guard on Certain R2900G and R3000H Load Haul Dump Machines{7050}
RM500B Reclaimer Mixer Machine Systems Pressure Reducing Valve
RM500B Reclaimer Mixer Machine Systems Hydraulic Pump and Mounting
RM500B Reclaimer Mixer Machine Systems Ladder
RM500B Reclaimer Mixer Machine Systems Electronic Control Wiring Group
RM500B Reclaimer Mixer Machine Systems Steering Knob
RM500B Reclaimer Mixer Machine Systems Solenoid Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.