Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | QTY |
A | 1P-0070 | Puller | 1 |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Use Tool (A) to remove steering wheel (1).
Show/hide table
Illustration 2 g03744377 - Remove the four bolts, the four washers, and cover assembly (2).
Show/hide table
Illustration 3 g03744379 - Disconnect four hose assemblies (4) from metering pump (3).
Show/hide table
Illustration 4 g03744382 - Remove four bolts (5), the four washers, and metering pump (3).
Illustration 1 | g03744376 |
- Install metering pump (3) in the reverse order of removal.