Window Wiper and Wiper Motor (Front) - Remove and Install
Start By:
- Connect the steering frame lock.
- Remove screws (1) and the washers.
Show/hide table
Illustration 2 g03731181 Show/hide tableIllustration 3 g03731195 - Remove screws (2) and the washers.
- Carefully remove panel assembly (3) far enough in order to disconnect harness assembly (4).
- Remove panel assembly (3).
Show/hide table
Illustration 4 g03731204 - Remove screw (5) and the washer.
Show/hide table
Illustration 5 g03731209 - Remove screws (7) and the washers. Remove cover assembly (6)
Show/hide table
Illustration 6 g03731231 - Cut cable strap (8). Disconnect harness assembly (9).
Show/hide table
Illustration 7 g03731242 - Disconnect hose (12).
- Remove bolts (11), the washers, and the nuts. Remove wiper arm assemblies (10).
Show/hide table
Illustration 8 g03731287 - Remove caps (13).
Show/hide table
Illustration 9 g03731308 Show/hide tableIllustration 10 g03731314 - Support wiper motor assembly (15) and remove nuts (14).
- Remove wiper motor assembly (15).
Show/hide table
Illustration 1 | g03731180 |
- Install wiper motor assembly (15) in the reverse order of removal.
- Tighten nuts (14) to a torque of
38 ± 2 N·m (28 ± 1 lb ft) . - Tighten bolts (11) to a torque of
14 ± 2 N·m (124 ± 180 lb in) .
- Tighten nuts (14) to a torque of
Caterpillar Information System:
794 AC Off-Highway Truck Advisor Monitoring System System Schematic
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Disassemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Remove and Install
SE60 V XW and SE60 VT XW Asphalt Screeds Screed - Check/Adjust
PL83 and PL87 Pipelayers Hydraulic System Oil - Change
2014/10/01 C Series Telehandler Parts Manuals Are Now Available on SIS Web {7000}
Rework Procedure for Replacing the Electric Swivel{5060} Rework Procedure for Replacing the Electric Swivel{5060}
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Wiring (Screed Heater)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Operator Platform
Procedure to Rework the Final Drive on R3000H Load Haul Dump Machines {4050} Procedure to Rework the Final Drive on R3000H Load Haul Dump Machines {4050}
735C and 745C Articulated Trucks Transmission and Transfer Gear Breather - Replace
PL83 and PL87 Pipelayers Hydraulic System Oil Sample - Obtain
C3.4B Engines Sensor (Data Link Type) - Test - Ammonia Sensor
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Assemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Remove and Install
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Disassembly
2014/10/07 New Software Is Used for Certain 772G Off-Highway Truck Engines {1920}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Assemble
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
730C Articulated Truck Pump Control Valve (Steering) - Remove and Install
785G Off-Highway Truck Systems Service and Parking Brake (Front) - If Equipped
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Hydraulic Cylinder (End Gate)
794 AC Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Remove and Install
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}