950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Bevel Gear and Pinion

Usage:

962M EJB


Illustration 1g03726273
Typical example

Table 1
Specification for 355-1152 Bevel Gear and Pinion Gp, 356-3418 Bevel Gear, and Pinion Gp and 363-3919 Bevel Gear and Pinion Gp 
Item  Qty  Part  Specification Description 
20  376-1575 Bolt  Use the following procedure in order to tighten the bolts (1):

1. Torque to 95 ± 10 N·m (70 ± 7 lb ft).
2. Torque additional turn of 180 ± 5 degrees. 
6V-8210 Bolt  Torque to 35 ± 8 N·m (26 ± 6 lb ft)

Caterpillar Information System:

TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C3.4B Engines DEF Pump Pressure Sensor - Test
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift Cylinder
R1600H Load Haul Dump Fuel System Primary Filter (Water Separator) - Replace
R1600H Load Haul Dump Fuel System Primary Filter (Water Separator) - Drain
2015/02/02 Improved Pressure Sensor Gp Is Now Used on Certain Cat® Products {1439}
785G Off-Highway Truck Systems Solenoid Valve Actuator
735C and 745C Articulated Trucks Torque Converter, Transmission, and Transfer Gear Oil Filter - Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Support
CW34 Pneumatic Compactor Engine Supplement Refrigerant Compressor - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Remove and Install
C4.4 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Lines - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Diagnostic)
AP500F Asphalt Paver DEF Manifold Filters - Replace
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Load Control Valve Lines
C3.4B Engines Idle Validation - Test
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Transmission Oil Pump
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Valve and Lines
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Heat Exchanger (Axle Oil Cooler)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.