Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 187-2718     | Filter Wrench As     | 1     |
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Open the engine enclosure.
- Open the left side access door. Turn the battery disconnect switch to the (OFF) position.
- Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" for the correct draining and filling procedure.
Show/hide table
Illustration 1 | g03726089 |
Show/hide table
Illustration 2 | g03726117 |
- Disconnect hose assemblies (2) and (4) from fuel filter base (5) .
- Remove the bolt and fuel line (3) .
- Use Tooling (A) and remove fuel filter (6) from fuel filter base (5) .
- Remove bolts (1) and fuel filter base (5) .
Installation Procedure
- Install fuel filter base (5) in the reverse order of removal.
Caterpillar Information System:
CW34 Pneumatic Compactor Engine Supplement Expansion Tank - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Engine Enclosure (Hood) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Engine - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Electric Starting Motor - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Battery - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Alternator Belt - Remove and Install
C7.1 Industrial Engine DEF Filler Screen - Clean
CW34 Pneumatic Compactor Engine Supplement Air Cleaner - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Selector and Pressure Control Valve (Secondary Steering)
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine and Transmission Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Valve
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner
CW34 Pneumatic Compactor Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Manifold Valve (Bypass) - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Muffler - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove and Install
CW34 Pneumatic Compactor Engine Supplement Refrigerant Compressor - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Support
735C and 745C Articulated Trucks Torque Converter, Transmission, and Transfer Gear Oil Filter - Replace
785G Off-Highway Truck Systems Solenoid Valve Actuator
2015/02/02 Improved Pressure Sensor Gp Is Now Used on Certain Cat® Products {1439}
R1600H Load Haul Dump Fuel System Primary Filter (Water Separator) - Drain
R1600H Load Haul Dump Fuel System Primary Filter (Water Separator) - Replace