3306B-XQ200 Rental Generator Set Engine Caterpillar


Refill Capacities

Usage:

3306B 8JJ

Lubrication System

The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. Refer to the Operation and Maintenance Manual, "Lubricant Specifications" (Maintenance Section) for more information.

Table 1
3306B Generator Set
Approximate Refill Capacities    
Compartment or System     Liters     Quarts    
Crankcase Oil Sump (Standard) (1)     (26.5)     (28)    
External System (OEM) (2)            
Total Lubrication System (3)            
( 1 ) These values are the approximate capacities for the crankcase oil sump which include the standard oil filters that are installed at the factory.
( 2 ) Enter the capacity for the External System in this row. Refer to either Caterpillar specifications or OEM specifications for further information. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter.
( 3 ) The Total Lubrication System includes the capacity for the Crankcase Oil Sump plus the capacity for the External System. Enter the total in this row.

Cooling System

To maintain the cooling system, the Total Cooling System capacity must be known. The approximate capacity for the "Engine Only" cooling system is listed. External System capacities will vary among applications. Refer to the OEM specifications for the External System capacity. This capacity information will be needed in order to determine the amount of coolant/antifreeze that is required for the Total Cooling System.

Table 2
3306B Generator Set
Approximate Refill Capacities    
Compartment or System     Liters     Quarts    
Engine Only     (14)     (15)    
External System (OEM) (1)     (34)     (36)    
Total Cooling System (2)     (48)     (51)    
( 1 ) The External System includes a standard factory installed radiator and piping.
( 2 ) The Total Cooling System includes the capacity for the "Engine Only" plus the capacity for the External System.

Fuel System

Table 3
3306B Generator Set Fuel Tank Capacity
   
Compartment or System     Liters     Gallons    
Fuel Tank     306     1158    

Caterpillar Information System:

C13 Industrial Engine Diagnostic Capabilities
C4.4 Engines for Caterpillar Built Machines Aftertreatment SCR System Dosing - Test
2014/10/03 New Wiring Harnesses Are Used on Certain C175 Marine and Petroleum Engines {1408}
C13 Industrial Engine Diesel Particulate Filter Regeneration
2014/08/07 Ash Service Reset Clarification for Certain Truck Engines {108F}
C13 Industrial Engine General Information
462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000} Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C and C175-16 Engines Selective Catalytic Reduction NOx Conversion Is Low
460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C3.4B Engines Oil Contains Fuel
C27 and C32 Generator Set Engines Fan Drive
462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C Marine Engines Fuel Injector
3516C Marine Engines Turbocharger Oil Lines
460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM820, PM822, and PM825 Cold Planer Track Shoe Bolts - Tighten
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Speed Control - Test
3516C Marine Engines Exhaust Elbow
3512C Engine Air Inlet Manifold - Remove and Install
C175-16 Locomotive Engine Speed/Timing - Test
3516B Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
PM820, PM822, and PM825 Cold Planer Tracks - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.