G3516 TA Engine Caterpillar


Fuel Pressure Is High

Usage:

G3516 AL7
如果下列任一事件代码为激活或记录状态,请使用本步骤进行故障诊断与排除。

表 1
J1939 代码和描述  注释 
1390-15
发动机燃油阀 #1 进口绝对压力:高 - 最低严重程度 (1) 
提供给燃油计量阀的压力高于触发点,且延迟时间已经终止。
警报输出被激活。
记录该代码。 

可能原因

  • 燃气压力调节器的设置不正确

  • 燃气压力调节器故障

修理建议

表 2
故障诊断与排除测试步骤  数值  结果 

1. 检查代码

A. 连接 Cat® 电子技师 (ET) 与维修工具接头。

B。 查找与事件代码系统相关的现行代码。
 

代码
 

结果:相关代码为现行状态。

修理:在继续进行此测试前,诊断并排除所有相关代码。

结果:代码 1390-15 为激活或记录状态。

转至测试步骤 2。
 

2. 监视提供给燃油计量阀的压力

A. 通过 Cat ET 监视"发动机燃油阀 #1 进口绝对压力"参数。
 

压力
 

结果:提供给阀的压力符合技术规格。

转至测试步骤 3。
 

3. 调节调节器

A. 调节燃气压力调节器,以获得正确的压力。
 

压力
 

结果:获得正确的压力。

修理:修理或更换调节器。

结果:获得正确的压力。
 

如果以上步骤未解决问题,请联系当地 Cat 代理商的技术通信员(TC)。 如需进一步的帮助,您的 TC 可以通过代理商解决方案网络(DSN)与您交谈。

Caterpillar Information System:

460-9231 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9231 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
2014/10/03 New Aftercooler Elbow Mounting Brackets Are Now Used On Certain 3600 and C280 Engines {1063, 1063}
2014/08/15 New Oil Cooler and Turbochargers Are Available for Certain 3512C Land Drilling Engines {1052, 1053, 1378}
2014/08/15 New Turbocharger Support Bolts Are Used on 3512C HD Drilling Engines {1052, 7553}
2014/08/08 New Engine Software Is Used on Certain 3512C Well Fracturing Engines {1901, 1920}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916} Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
2014/08/01 A New Alternator and Mounting Hardware Are Used For Certain G3306B Engines {1405}
XQC1200 and XQC1600 Power Modules Engine Oil Pressure Sensor - Remove and Install - Filtered and Unfiltered
PM820, PM822, and PM825 Cold Planer Track Drive Planetary Oil Level - Check
PM820, PM822, and PM825 Cold Planer Track Drive - Inspect
PM820, PM822, and PM825 Cold Planer Steering Cylinder Ends - Lubricate
XQC1200 and XQC1600 Power Modules Turbocharger Inlet Temperature Sensor - Remove and Install
460-9243 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9243 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
G3516 TA Engine Fuel Pressure Is Low
460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C3.4B Engines Oil Contains Fuel
460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C and C175-16 Engines Selective Catalytic Reduction NOx Conversion Is Low
460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000} Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C13 Industrial Engine General Information
2014/08/07 Ash Service Reset Clarification for Certain Truck Engines {108F}
C13 Industrial Engine Diesel Particulate Filter Regeneration
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.