966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Drive Shaft

Usage:

972M XE AN3


Illustration 1g03693834

Table 1
Specification for 370-2152 Drive Shaft Gp 
Item  Qty  Part  Specification Description 
Tighten the bolts to 71 ± 10 N·m (52 ± 7 lb ft)
20  138-3816 Bolt  Before assembly, apply red Loctite 271 to the thread.
Torque to 170 ± 13 N·m (125 ± 10 lb ft)
Tighten the set screw until it bottoms in keyway, then back off 1/2 turn and tighten jam nut to 24 ± 4 N·m (212 ± 35 lb in)
Tighten the bolts to 58.5 ± 6.5 N·m (43.1 ± 4.8 lb ft)
370-2263 Slip Joint  The spline should be lubricated when the machine is fully articulated. 
10  4V-7081 Strap  Before assembly, wipe bearing cap and mounting faces clean. 
125-8810 Spider and Bearing Gp  Apply 1P-0808 Multipurpose Grease to the bearing surface and connecting passages at specified service intervals. 
372-0687 Bolt  Torque to 65 ± 10 N·m (48 ± 7 lb ft).
Turn an additional angle to 120 ± 10 degrees. 
Before assembly, lubricate spline and all unpainted shaft surface at stub end with 4C-5599 Anti-Seize Compound. 

Caterpillar Information System:

424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Remove
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Disassemble
794 AC Off-Highway Truck Machine Systems Air Conditioner Lines
Command for Underground Machine Telemetry - Report
794 AC Off-Highway Truck Systems Location of Components (Automatic Lubrication System)
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Power Flow
794 AC Off-Highway Truck Systems Location of Components (Hydraulic System)
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Solenoid Valves (Transmission)
M314F, M316F, M318F, M320F and M322F Wheeled Excavators CAN Data Link - Test
Supplemental Service Information for the USN Seabee 279D Compact Track Loader{0374, 7000} Supplemental Service Information for the USN Seabee 279D Compact Track Loader{0374, 7000}
2014/08/20 A New Torsional Coupling Gp is Now Used for Certain Articulated Truck Transmissions {3252, 3279}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Axle Oil Cooler
794 AC Off-Highway Truck Machine Systems Axle Mounting
424B Backhoe Loader Machine Systems Bank Valve (Backhoe) - Install
794 AC Off-Highway Truck Machine Systems Electronic Control Module
794 AC Off-Highway Truck Machine Systems Piston Pump
794 AC Off-Highway Truck Machine Systems Battery
424B Backhoe Loader Machine Systems Bank Valve (Loader) - Remove
794 AC Off-Highway Truck Machine Systems Control Manifold (Steering)
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Steering) - Mounting
416F2, 420F2 and 430F2 Backhoe Loaders Safety Messages
794 AC Off-Highway Truck Machine Systems Axle Mounting
3516B Generator Set Engines with Dynamic Gas Blending Engine Has Early Wear
834H Wheel Dozer and 836H Landfill Compactor Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.