Cat® Command For Hauling Caterpillar


E1490

Usage:

- AT6
Conditions Which Generate This Code:

EID 1490 Reduced Brake System Response

Event code EID 1490 Reduced Brake System Response occurs with varying levels of severity. Based on the severity, the autonomous mining truck (AMT) will respond in different ways: logging but continuing normal operation, limiting machine speed, or AMT coming to a complete stop. This event code could be caused by wear in the wheels, tires or suspension systems, incorrect calibration or a problem in the braking system. Follow this procedure if an event EID 1490 Reduced Brake System Response occurs.

Note: Ensure that all diagnostic codes have been cleared before beginning this procedure.

Test Step 1. VISUALLY INSPECT CONDITION OF WHEELS, TIRES AND SUSPENSION.

  1. Wheels.

    • No misalignment as viewed from ahead or behind.

    • No damaged, bent, or broken components.

  2. Tires.

    • Free of numerous major pock marks on the tread.

    • Minimal cracks in the tread and sidewall, and If there are tracks, no steel ply visible.

  3. Suspension.

    • Chrome is not damaged.

    • Minimal amounts of caked on or solid debris.

    • Only insignificant amounts of leakage.

Expected Result:

No visually apparent problems or defects noticeable.

Results:

  • Problems visually apparent with the wheels. - Proceed to Test Step 2.

  • Problems visually apparent with the tires. - Proceed to Test Step 3.

  • Problems visually apparent with the suspension. - Proceed to Test Step 4.

  • No visually apparent problems or defects noticeable. - Proceed to Test Step 5.

Test Step 2. CORRECT VISUAL PROBLEMS WITH THE WHEELS.

  1. Correct visually found defects

    • No misalignment as viewed from ahead or behind.

    • No damaged, bent, or broken components.

  2. Reference Front Wheels base truck manual.

    • Disassembly and Assembly, UENR1142, "793F Off-Highway Truck (Command For hauling) Machine Systems"

    • Troubleshooting, UENR2227, "793F Series CMD Off-Highway Truck/Tractor (Command for hauling) Steering Electronic Control System"

  3. Reference Rear Wheels base truck manual.

    • Disassembly and Assembly, UENR1143, "793F Off-Highway Truck (Command For hauling) Power Train"

    • Troubleshooting, UENR2209, "793F CMD Off-Highway Truck (Command for hauling) Power Train Electronic Control System"

Expected Result:

Visual problems and defects corrected.

Results:

  • Visual problems and defects corrected for wheels only. - Proceed to Test Step 8.

  • Visual problem and defects corrected for wheels but remain for tires and suspension. - Proceed to Test Step 3.

Test Step 3. CORRECT VISUAL PROBLEMS WITH THE TIRES.

  1. Check tires.

    • Free of numerous major pock marks on the tread.

    • Minimal cracks in the tread and sidewall, and If there are tracks, no steel ply visible.

  2. Correct problems.

    • Consult documentation from tire manufacturer.

    • Front Wheels: Disassembly and Assembly, UENR1142, "793F Off-Highway Truck (Command For hauling) Machine Systems"

    • Rear Wheels: Disassembly and Assembly, UENR1143, "793F Off-Highway Truck (Command For hauling) Power Train"

Expected Result:

Visual problems and defects corrected.

Results:

  • Visual problems and defects corrected for tires only. - Proceed to Test Step 8.

  • Visual problem and defects corrected for wheels and /or tires but problems remain with suspension. - Proceed to Test Step 4.

Test Step 4. CORRECT VISUAL PROBLEMS WITH THE SUSPENSION.

  1. Check suspension and correct problems.

    1. Special Instruction, SEHS9411, "Servicing the Suspension Cylinders for Off-Highway Trucks"

Expected Result:

Visual problems and defects corrected.

Results:

  • Visual problems and defects corrected for suspension only. - Proceed to Test Step 8.

  • Visual problem and defects corrected for wheels, tires, and /or suspension. - Proceed to Test Step 8.

Test Step 5. COLLECT DIAGNOSTIC DETAIL INFORMATION.

  1. Open Cat MineStar System client.

  2. Go to Contents > pit link > Field Communications Monitor.

  3. Select the comms item that displays EID 1490.

    • Collect EID time from Cat ET and match to time in Cat MineStar System client.

    • In the diagnostic detail: "ComponentID" = "1490"

    • In the diagnostic detail: "FailureModeDescription" = Reduced Brake System Response


    Illustration 1g03326973

  4. Once selected, the diagnostic detail message will display in the bottom left of the screen. Record the information under "extendedTexts" section.

  5. This information will be helpful when proceeding through this process.

Expected Result:

Diagnostic details collected.

Results:

  • Diagnostic details collected. - Proceed to Test Step 6.

  • Diagnostic details are not available. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP

Test Step 6. RUN PLANNING CHECK OUT PROCEDURE.

  1. Perform the Planning System Checkout in Special Instruction, REHS8845, "Autonomous Calibration Procedure for CMD4.1 on the 793F CMD Off-Highway Truck". This document can be found on the Publication Box site .

Expected Result:

Planning checkout is completed successfully.

Results:

  • Planning checkout is completed successfully. - Proceed to Test Step 8.

  • Unable to complete the planning checkout successfully. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP

Test Step 7. TROUBLESHOOT THE PROBLEM THROUGH THE BRAKING SYSTEM TROUBLESHOOTING MANUAL.

  1. Troubleshooting the truck braking system using SOTTA, UENR2210, "793F Off-Highway Truck/Tractor Braking System- System Operation, Troubleshooting, Testing and Adjusting" manual. This document can be found on the Publication Box site.

Expected Result:

Problem discovered and corrected.

Results:

  • Problem discovered and corrected. - Proceed to Test Step 8.

  • Problem cannot be resolved in the braking system troubleshooting. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP

Test Step 8. RESTART SYSTEM.

  1. Key ON the machine and verify status of event code.

Expected Result:

EID 1490 cleared.

Results:

  • EID 1490 cleared. - STOP

  • EID 1490 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary but code remains active. - Proceed to Test Step 5.

  • EID 1490 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary. Diagnostic details have been recorded and planning checkout procedure has been successfully completed but code remains active. - Proceed to Test Step 7.

  • EID 1490 is still active after completing all above steps. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.