XQC1200 and XQC1600 Power Modules Caterpillar


Fuel Priming Pump - Remove and Install

Usage:

XQC1200 N1G

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Isolate the electric power generation set. Refer to Operation and Maintenance Manual, "Generator Isolating for Maintenance" for the correct procedure.

  2. Turn the fuel supply to the OFF position.


    Illustration 1g03657908

  3. Disconnect hose assembly (5).

  4. Disconnect tube assembly (2).

  5. Disconnect harness assembly (3).

  6. Remove bolts (1). Remove fuel priming pump (4).

Installation Procedure

  1. Install fuel priming pump (4) in the reverse order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.